The USB-C switcher allow you to connect two USB-C sources to one USB-C display or connect one USB-C source to toggle between two displays,(Two displays CANNOT display simultaneously),both of your source and display's USB-C Port should support DP Alternate Mode for Video Transmitting.Ultra HD 8K Video Experience.{while using,you must Power the product via supplied 5V DC Power Cable,or your connection would not show anything}
Function 1: 2IN 1Out
1. Connect two sources to the port "USB-C 1" and port "USB-C 2"
2. Connect the display from the Supplied and Fixed USB-C Cable on the switch.
3. Power the switch with the supplied USB to DC cable
4:Press"Select"Button to switch between two Sources
Function 2: 1In 2Out
1.Connect the source from the supplied and Fixed USB-C cable on the switch.
2. Connect two displays to the port "USB-C 1" and port "USB-C 2"(Note: two displays cannot work at the same time).In this connection,you can also connect USB-C to HDMI or Displayport Cable from the Switch to relatively Monitor.
3. Power the switch with the supplied USB to DC cable
4:Press"Select"Button to switch between two Displays
Function 3:Power Delivery&Data
1:Data Transfer,using USB3.1 Gen 2 Cable for Max 10Gbps data Transmissions from your Host devices to your data storage devices.
2:Max 100w Power Delivery for your relatively devices.
1:While using,you must power the switch with the Supplied USB to DC Cable,or your external monitor would not show anything.
2:In the market,There are various USB-C cables. If you want to realize the function of video transmission, then your own USB-C cable must support the relevant video transmission protocol. Similarly, if you want to realize data transmission, then your prepared USB-C cable must support the data transmission function.
3:If you connect to your USB-C Monitors,your Monitor's USB-C Ports should support Video Transmitting.
You are allowed to connect the source device from the USB C end via the supplied fixed USB C Cable,then connect to two USB-C displays to the port "USB-C 1" and port "USB-C 2"in the switch.In this connection,you can connect via USB-C to HDMI or DP Cable to your monitor.Two Displays can not connect at the same time,the USB-C Cable you used should support for video transfer.Press"Select"Button to switch between two displays.
You are allowed to connect two sources to the Port "USB-C 1" and "USB-C 2"in the switch,then connect to the display with the supplied Fixed USB-C Cable.For the USB-C Cable connected between the source devices and Our Switch,these kind of cable should all supporting video transmissiomns.At this connection,you can not connect USB-C hdmi or USB-C displayport cable to your Monitor.Press"Select"Button to switch between two sources.
USB-C Switch with Power and Data Function,It supports Max 100w Power Delivery and Max Transmissions Speed 10Gbps(USB3.1 Gen2),With our switch, you can charge your mobile phone, computer, tablet and other devices, and you can also transfer data from your computer, mobile phone, etc. to your U disk and other devices. Both data and charging functions require your USB-C cable to support the above functions
Ultra 8K Video Output,you can output max 8K@30Hz 4K@120Hz 1080P@165Hz via our USB-C Switch/Splitter to your USB-C Displays,The maximum resolution of your output depends on your Source device, monitor and cable used.When you use our switcher to realize the video function, we recommend that you do not use too long cables(The sum of the cables at both ends does not exceed 3 meters).Too long cables at both ends will cause the screen to flicker or the screen cannot be displayed .
