Features
- It is designed for enthusiasts with need for controlling numerous system fans
- Capable of expanding one motherboard PWM fan header to support up to eight fans.
- Power by dual molex header from PSU, supports 8pcs 12V2A high power fans working at the same time
- eight capacitances equipped for every fan output, protect your device safe.
- Support PWM Function, Speed control, satisfy your control needs.
- Compatible with 3-pin / 4-pin Fans (Due 3pins no PWM controller, 3pin fans would run in full speed. )
- Comes with Self-Stick for easy installation and options to hide the PCB itself.
- All fans power by 12V from PSU, reduce motherboard power load and heat.
- Since only one RPM signal can be read by one motherboard connector, only ' Red header Fan' channel of the PWM hub carries an RPM signal; thus the motherboard will only read the RPM signal of the PWM device that is connected to this port
Note:
Port of red header is for CPU Fan, request to connect PWM fan priority always. Hub runs in full speed and does not support PWM function if just connect others and miss this red header connecting
- Fan hub is powered by 2x molex 4pin (12V only) from your PSU
- Supports eight 12V/2A high power fans working at the same time
- Compatible with 3pin & 4pin Fans
- PWM controlling works for 4pin fans only
- 3pin fans run in full speed
- 8 capacitor equipped fan hub
- Provide more protection for your fans connected
- Port of red header is for CPU Fan, request to connect PWM fan priority always
- Dual molex 4pin header of your PSU is requested
- PWM control header must connect to your motherboard CPU_Fan header for PWM controlling
- Two LED indicators
Specification
Product | 8 Ports PWM 4pin Fan Hub |
---|---|
Input | Dual Molex 4pin (12V only) |
Output | 8PCS 12V/2A High Power Fan Headers |
Fan Connectors | 8 Ports PMW TX4 4Pin Male for fans (Red header for CPU fan) |
RPM & PWM Connector | Connect to Motherboard for PWM function |
RPM & PWM Cable | 1.64Feet |