BEST SELLERS

In Hard Drive / SSD Enclosures

Its universal and work just fine for me I used it for cloning my drive

Prettiest simple, easy-plug-in play

Hard drive toasters are neat, except that the hard drives plug in where they could possibly wiggle at the connector. This enclosure has enough space to slide in a hard drive, then slide forwards to make the connection

fast as lightning to well over 200 mb/s sometimes cool rgb effects nearly keychain sized

Works with current versions of SSD sticks.... has C connector

I've used 10-14GB external drives from Seagate and WD, and they run hotter than I would like. I tried an external case with a fan, but it was large and didn't hold the drive securely. Drives in this enclosure run much cooler than the manufacturer's external drive; I assume that's because the aluminum case acts as a heat sink. I saw that one review complained that the drive isn't held securely. At first I thought that was completely untrue, since the drive slides into the enclosure like a glove and the entire enclosure holds it securely. But, then I realized that the reviewer may have used a thinner drive. Since I'm using 16 and 18 TB drives, they're about an inch wide and are a perfect fit, but some drives are thinner. I put in a thinner drive, and indeed it can move around a bit, but the connecter can't pull out so it's not a problem. Perhaps this arrangement might damage the connecter if the drive were dropped from 6 feet, but it's never a good idea to drop a drive from 6 feet. That reviewer listed the drive-securing method as "must not buy"; I consider the drive-securing method as a pro, since it makes it easy to change the drive. I don't know whether a thin drive would run as cool as a thick drive; the thin drive would probably have less contact with the aluminum case.

Fast throughput (depends on SSD, of course). Nice quality cables. No screws to loose. Easy to assemble. Works with Linux.

2 rubber plugs, a sticky thermal pad and a heat sink came with the casing.

Well made, working as expected. Nice small case. Good features, as shutting down with the PC. ON/OFF switch. Its own power supply. Two cables, rubber feet.

great for setting up a hd. also for cloning a drive

Fast! Works with my Haswell motherboard.

SATAIII 6Gbps drive support UASP - massive difference in performance vs typical USB 3.0 enclosures when used with SSD's Less CPU Load Small and excellent build quality.

Exactly as it says on the tin. Easy to use and no screws to lose. Perfect for an external harddrive.

I ordered 2 of these drive cases to put to use a couple of WD 1Tb drives I had leftover from an upgrade. One of the two boxes worked fine, the other was DOA. I RMAed it and New Egg sent me one that works. Failures can happen to the best of them but the company (Vantek) should have better quality control. That dead box should never have gotten out the door. Other than getting a dead drive box, both seem to work as advertised.

- Small - Good Performance - USB-C to USB-A cable included.

Super precision cut metal case. The supplied C to C and C to Usb cables are really nice. The SSD mounting is really slick.