I switched mobos so i went with this and man was it worth it. After applying it i immedieatly ran some stress tests to see if this actually worked. I used cheap aftermarket but new paste on my first stress test and averaged about 62-65c. Same stress test with TF8: 57-60c. Idle temps were about 5c-8c lower with TF8.
-Works well, and easy to apply -Personal opinion: Likely genuine!
Got mine for $5 and some odd cents. And what can I say it worked perfectly I got rid of the stock thermal paste on my CPU and CPU Cooler with ArctiClean and put of the Arctic Silver 5. My stock Temps where 32 Degrees Celsius (Idle) and 83-89 Degrees Celsius (Load) while now with the Arctic Silver 5 its gone down to 27 Degrees Celsius (Idle) and 68-77 Degrees Celsius (Load). Both tests were using AIDA 64 System Stability Test.
Best thermal cleaner and prep.
Use these thermal pads with a high-quality thermal paste if you're replacing your thermal pads on a GPU or other device like a game console or laptop.
Arrived in perfect shape is exactly as depicted functioned as intended
Size was acurate, well packaged.
Keeps my processor running cooler than any other paste out there.
Dramatically lowers CPU temps by allowing more efficient heat transfer No more thermal throttling Looks trippy as you lay it down (liquid mirror) Sounds baller when you talk to your fellow nerd brethren
Very good and effective to clean thermal paste
-At 62.5 W/m*K it is only surpassed by liquid metal-Much easier and safer to use than liquid metal-Never dries or wears out-Easy to cut to size with scissors
Dimensions are accurate and do its job as intended
Easy-to-use spreader applicator tip included, but Id recommend just putting a small "X" in the middle and then putting the cooler on. It spreads out itself if applied correctly.