Holiday Shipping Details & Extended Holiday Returns 
8-in-1 High-Performance USB-C Expansion: 8-in-1 USB-C Hub integrates M.2 NVMe/SATA SSD enclosure, PD100W fast charging port, 4K HDMI, 10Gbps USB-C, USB 3.2 Gen 2 ports, USB 2.0, and SD/TF card reader, catering to your various connection needs.
Important Tips:
1. Before using, please review the tutorial video to learn how to install on Windows or iOS systems. Brand new SSD drive should be partition and format it first under disk management, then it can be used normally, otherwise it cannot be used. If the NVMe card is not recognized at all, it is possible that the issue could be related to the lack of partitioning on the new drive. Please check if the NVMe card has been partitioned before using it in the enclosure.
2. This SSD Hub comes with a one click hidden SSD function. If the system does not read your SSD after connecting, please try pressing and holding the button for 3 seconds to open the SSD;
3. SSD enclosure is for M.2 NVME/NGFF (SATA) M Key& (M+B) Key SSD. Applicable to sizes 2242/2260/2280 SSD. NOT Compatible with M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs.
4. TF and SD slot can not use at the same time. 100W PD charging port is for charging only, not for data transmission. USB-C 3.1 Port is for data transmission only.
5. Before use, please confirm the PC devices USB-C port can be support fully function transmission(audio/video, data PowerDeliver etc).
6. To protect your SSD, it is not recommended to insert and remove the SSD multiple times.
| SSD | 10Gbps, Compatible with SSD of M Key or M+B Key, Support NVME & SATA Protocol |
|---|---|
| HDMI | HDMI1.4 & HDCP1.4 - Max resolution up to 4K@30hz |
| USB Port | 1 * USB 3.2 Gen2 - 10Gbps & 1 * USB2.0 - 480Mbps |
| USB-C Data | 10Gbps |
| Charging Port | PD3.0 - USB C 100W |
| SD/TF | SD/TF 3.0, Max speed up to 104Mb/s |
M.2 NVMe/SATA SSD Inside: Experience unparalleled storage performance with the built-in M.2 NVMe/SATA SSD in ESTONE USB C Hub. This cutting-edge feature is compliant with the USB3.2 Gen2 standard, delivering blazing-fast data transfer speeds of up to 10Gbps(The actual transfer speed depends on the speed of your SSD, the type of USB port, and the performance of your computer)
Warm tip: A brand new SSD needs to be initialized before it can be used. Please watch the operation tutorial on the product page to learn how to operate it on Windows and Mac systems.
High-Speed Transfer and Wide Compatibility: Built-in M.2 NVMe/SATA SSD interface with a transfer rate of up to 10Gbps, read/write speeds of up to 900MB+/S, and compatibility with various SSD sizes, applicable to Windows, Mac OS, Linux, and Chromebook OS.
PD100W Fast Charging & Rapid Card Reading: The PD100W fast charging port meets your charging demands, while the SD/TF card reader supports speedy transfer of up to 104M/s, making photo and video transfer a breeze.
4K HD Video Output: Enjoy 4K 3840 x 2160@30Hz HDMI1.4 images for an immersive HD experience, supporting HDCP1.4 specification.
SD/TF Card Reader: SD/TF card reader makes it easier to transfer files from drones and action cameras to laptops. Can be used for photo backup while traveling. TF and SD cards can be used simultaneously.
