192KHz HDMI Audio Extractor HDMI ARC Converter SPDIF + Coaxial + 3.5mm Output, Audio Return Channel Adapter Compatible with Dolby@5.1, DTS@5.1, Dolby AC3,DSD,PCM,LPCM

HDMI ARC Audio Extract
HDMI ARC Adapter to digital and analog signals. Use the HDMI cable to connect the TV HDMI ARC port to the ARC audio converter, and then connect optical/coaxial or 3.5mm to to soundbar, speaker, home theater, A/V receiver, etc. Note: 3.5 Jack only supports only PCM/LPCM audio. TV must have an ARC port, otherwise it cannot be used.
Specificaitions:
192KHz HDMI-compatible Audio ARC Extractor HDMI-compatible ARC To Toslink + Coaxial + L/R Converter Audio Return Channel Adapter
Support Coaxial output
Support 3.5mm stereo headphone output
High performance audio amplifier
Support switch noise reduction
Support automatic signal mute function
Support transmission of 192 KHz audio sampling rate
Optical fiber/Coaxial interface supports 5.1 channel transsmission
ARC and 3.5mm headphone output volume can be controlled by TV(CEC)

HDMI-compatible Audio Adapter eARC Coaxial SPDIF Jack HDMI Extractor ARC 3.5mm Headphone for ARC TV

HDMI ARC function: (The TV must have an ARC port, otherwise it cannot be used). Extract audio from your TV to Soundbar or Amplifier via the TV's ARC port. Use HDMI cable or Micro cable to connect one end to TV ARC port, one end to HDMI ARC Converter, then connect SPDIF/Coaxial or 3.5mm to sound bar, speaker, home theater, A/V receiver, etc.

192KHz sampling rate: Built-in CEC volume control protocol, the TV remote control can adjust the volume. Effectively solve the defects of similar products. Support 32, 44.1, 48, 96, 192KHz sampling rate, 24-bit left and right channels. (HDMI 2.0 cable recommended).

Digital Noise Reduction: Using high-end chips, digital noise reduction technology, signal gain technology, dual signal processing, the sound quality is clear and pleasant. The aluminum alloy shell has good heat dissipation and durability. Support multi-channel simultaneous audio output, sound synchronization without delay. No driver, plug and play.

2.0ch/5.0CH Extractor: Input: HDMI ARC, Output: 3.5mm Jack,Toslink/SPDIF and Coaxial.Supports PCM5.1 / LPCM 2.0 Channel, HDMI ARC Input to 2.0CH 3.5mm jack or Optical/Coaxial 5.1 Output Headphone Output; Just Plug and Play

Dolby Digital Audio: Supports Dolby@5.1, DTS@5.1, Dolby AC3,DSD,PCM,LPCM. (NOTE: It will not work with Dolby atmos/Dolby Digital Plus etc., Also please set the Audio Output to PCM or LPCM before Using)

Note:

please connect HDMI port with "ARC" for HDMI TV.
3.5mm Jack only support PCM/LPCM audio.if you want the headset audio to work properly,please set the HDMI ARC audio output format of TV to PCM/LPCM.

Specifications: