Gas Leak Detector, Natural Gas Detector Portable Handheld Gas Sniffer with Audible & Visual Alarm, Sensitivity Adjustable Locates Combustible Gas Leak Sources Like Methane, Propane for Home HT60

[Portable Gas Leak Detector] This portable pen type gas leak detector can detect a large number of flammable gases, like acetone, acetylene, alcohol,ammonia, benzene, butane,ethanol, oxirane, gasoline,hexane, hydrogen, methane,naphtha, natural gas, paintthinners, propane, solvents and more. It can accurately check whether gas leakage or not, avoiding gas explosion, protecting life and property. Notes: it only detects combustible gases, can not detect CO2.

[Visual & Audible Alarm] This gas detector pen will send out a visual and audible alarm if any combustible gas is detected. As the concentration goes up, the audible alarm beep more frequently and the screen flashes red with a bar graph indicating the approximate strength detected. LCD display with green backlight ensures clear visibility even in dim light. It has a low-battery indicator. Auto power off after about 5 minutes if there are no operation.

[High & Low Sensitivity Adjustable] High and low sensitivity are switchable for different scenarios. Low sensitivity detects 500-1000ppm. High detects 50-500ppm. Set high sensitivity to find small gas leaks, set low sensitivity to find larger explosive gas leaks. Press the "S" button to switch sensitivity. When the "S" button is lit up, it is in high sensitive mode, which is the default. Pressing the "S" button will switch it to low sensitive mode, where the "S" button will not be lit.

[Convenient Pocket Clip Design & One Hand Operation] Lightweight and compact, this gas leak detector pen conveniently clips to your shirt pocket to carry with you. The non-slip texture on both sides of the gas leak detector fits nicely and ergonomically in your hand. Has an easy-to-understand interface with its on/off buttons and sensitivity switch buttons "S", customers can operate the device with one hand. Without complicated instructions, extremely simple to use.

[Wide Application & Warranty] Take this handheld detector in the area where you think there might be a leak and wait for the device to display the current gas levels. It is great for checking for leaks on gas lines, storage cylinders, valves, connections, gauges, regulators, etc. Intendvision offers 12-Month Warranty and friendly customer service. Notes: this gas detector comes with a screen protector. lf there are some scratches on screen protector, you can remove or keep the protector.

HT60 Gas Leak Detector Specifications

Material: ABS

Display: LCD

Detection Range: 50~1000ppm (methane)

Response Sensitivity: <50ppm (methane)

Warm-Up Time: Approx. 30 sec

Reactions Time: 500PPM: Approx. 5sec; >500PPM: Approx. 2sec

Alarm Mode: Visible & Audible

Operating Conditions: 0~50°C / 20~80% RH

Storage Conditions: -10~60°C / 20~80% RH

Powered By: 2 x 1.5V AAA Alkaline

Note:

Turn on the instrument in a clean air environment and wait for the warm-up to complete.

Always check the function of the gas detector before using it to ensure that it is normal.

Ensure that the gas concentration does not exceed 20% LFL ( Lower flammability limit ).