Holiday Shipping Details & Extended Holiday Returns 
Do you know how much moisture is in your walls or ceiling?
Do you know if the firewood you will be using is dry enough?
Do you know how to avoid skirting board rot and corner mold?
DURFICST knows!
The pinless moisture meter uses a dielectric measurement method that does not require electrodes or probes to be inserted into the material being measured. High frequency sensor technology enables the moisture meter to detect moisture content at a depth of 20-40 mm below the surface of the object, and the moisture measurement is absolutely non-destructive.
- With DURFICST's needleless moisture meter, you can measure the moisture inside building materials and wood more accurately to a depth of 20 to 40 mm without causing any damage to the measuring surface.
- It is also very important to measure the moisture content of firewood before using it in winter.
- 100% non-destructive measurement.
- Easily measure moisture content in small spaces.
- Measuring the moisture inside an object.
- Color high definition large screen.
- Max/Min and data hold functions.
Audible alarm, adjustable alarm range.
With the DURFICST humidity sensor, you can easily, quickly and reliably determine the humidity in your walls - whether your walls are made of wood, lime sand bricks or concrete.
The DURFICST needleless moisture meter allows the user to assess the moisture content of a wide range of materials without penetrating the surface, providing a fast, non-destructive indication of the moisture distribution at a depth of 20-40mm on the surface of the object being measured, with a spherical probe that measures small spaces and covers a wide area.
The wood hygrometer will beep when the humidity level exceeds 30. In "HOLD" mode you can press "SET" to set the alarm value. the default alarm value for "RISK" is 30 and the default alarm value for "WET" is 60. all capacitive humidity indicators do not directly determine the percentage of moisture content in the masonry, but rather a physical key figure which depends on the humidity and the type of building material! Different materials have different humidity ranges, please refer to the humidity cross-reference table in the manual for details.
The easy-to-read HD color display warns and informs of dry, transitional and wet spots on the wall in the form of "DRY", "RISK" or "WET", while the color analog bar clearly shows the range of humidity values and is very easy to read.
In order to save battery power, the moisture detector will automatically shut down after 30 minutes of power on without operation. Press and hold the "MEAS" button to power on in the off state to cancel this function.
The exterior of the humidity tester is wrapped by soft rubber, which is comfortable to touch, shock and drop resistant, sturdy and durable.
A short press on the "MEAS" button once after each power-on can complete the calibration within 3 seconds, allowing for quick and accurate measurements.
