KW600 Battery Load Tester Key Features:
Testing Capacity: all 100-2000 CCA 12V batteries
Test Result: Good, Recharge or Replace
Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.
Internal resistance value (mO)
Life in percentage (%)
Cranking system
Charging system
Voltage test in waveform
Record and re-play battery data
Print data, life-time free update software service
10 languages: English, French, Spanish German, Japanese, Russian, Italian, Portuguese, Polish, Dutch
How to identify if the battery is good or needs to be replaced?
Plug and play: Input the rated battery capacity, KW600 will start analyzing the battery's CCA value, charge (%), voltage (v), internal resistance (O), rated, and battery healthy (%) and display the test result on the screen within seconds.
Battery test result includes 5 types as following:
GOOD BATTERY: The battery is without any problem, use it without worries!
GOOD, RECHARGE: Good battery but low current, recharge before using.
REPLACE: The battery is already or near to reach the end of the using life, please replace the battery.
BAD CELL, REPLACE: Battery interior damaged, bad cell or short circuit, replace the battery.
CHARGE-RETEST: Unstable battery shall be recharged and retested to avoid error.
Features:
DISPLAY VOLTAGE IN GRAPH
Displayed voltage readings in a chart to better analyzing the status of your car battery! You could playback the waveform in tester or upload to computer for more precise analysis.
FAST & ACCURATE RESULTS
The KONNWEI KW600 12V automotive battery analyzer works much faster and more accurate than other testers, with the top-level STM-32 main chip and high precision amplifier which calibrated by professional equipment, provide you the reliable results within seconds!
RECORD AND REPLAY BATTERY DATA
KW600 auto battery tester will record the waveform data and the last result, allows you review the testing data and upload to your computer for storage or print.
LIFE-TIME FREE UPDATE SERVICE
Press and hold any button of the battery tester before connecting to PC with USB cable, the screen will light up and shows ‘UPDATE MODE’, click the “Check Update” on apps, and the tester will start updating.
Note: Update and printing function can only be used on Windows OS, cannot be updated on MAC SYSTEM.