7 Ports USB3.0 HUB 5Gbps CD-ROM Drive Bay Front Panel HUB 4 USB 2.0 + 2 USB3.0 19pin HUB Charging Expansion Bracket

Type A

Description:

1. The use of USB interface causes USB interface is not enough, or the USB interface is used more and more frequently, resulting in great damage to USB port.

2. The main motherboard has already been equipped with a 9pin socket. When the port of the USB2.0 front chassis is not enough, it can use this panel, so long as the panel is inserted through a 9PIN line to the main board, 6 pre USB2.0 and a built-in USB interface are introduced, which is installed in the idle drive position to facilitate the USB device.

3. USB2.0 increases the power consumption of the large 4PIN, and can provide enough current for 7 high-speed USB interfaces to solve the problem of insufficient power supply in front of the chassis.

4. The built-in USB port can be inserted into a device such as a softdog, mouse transmitter, etc.

5. USB2.0 is a double row, a total of 10pin, of which 1 pin have been pulled out, so it is also called 9 pin.

Specification:

Product size: optical drive position: 148mm*77mm*40mm/5.82*3.03*1.57''

Product color: Black

Hardware requirements: One motherboard or adapter card with 9PIN interface, with 5.25 inch CD-ROM chassis 

Type B

Feature:

1. It is in accordance with the 3.0 specification of universal serial bus.

2. It supports simultaneous operation of multiple USB 3.0, USB 2.0 and USB 1.1 devices.

3. The heat exchange function allows connection / disconnection of the device without interruption of the power system.

4. Plug and play.

Specification:

Product size: CD-ROM Drive Bay: 148mm*80*42mm/5.82*3.14*1.65''

Interface: USB2.0 *4, USB3.0 *2, fast charging *1

Back end connector: 19pin