Acaigel 3 in 1 2-6S Li-Po/Li-Fe Battery Balancer Voltage Tester Display For RC FPV Drone

Item: 3in1 2-6S Battery Balancer
Parameters:
Name: 3 in 1 Battery Balancer
Color: black
Support battery type: Li-Po/Li-Fe 26 cell
2-6 cell lithium / li-fe polymer (standard voltage 7.4V 11.1V using split voltage connector)
Receiver battery: 1.2V 8.5V DC (not the limit of battery type, but needs 7.4V - 25.2V external power, use JST connector)
Balance voltage setting range (Lower limit): 2.0V - 3.9V (preset value 3.3V ).
Discharge voltage setting range (Lower limit): 3.0V - 4.2V (preset value 3.9V ).
Item Size: 9.3 x 6 x 1.7 cm
Item Weight: 66g

Feature:
The balancer / discharger is designed for Lipo and LiFe battery, it can measure the battery voltage / balance cell voltage in the battery pack and discharge the battery for long time storage.

1 Designed for Li-Fe lithium polymer batteries, measure the battery voltage accurately and balance the cell voltage in the battery pack, or by discharging the battery for long-term storage.
2 Safe and Convenient: Provides instantaneous voltage reading and indicates abnormal cells immediately.
3 li-polymer / li-fe support 2-6 balance and discharge cells.

4. Thermal design on the back to ventilate and prevent overheating.
5 With its JST connector for external power, you can measure the battery voltage of the receiver.

The balance function of the three-in-one battery balance display allows the battery to perform the balance function before and after charging or before and after use (discharge). It also allows the use of a charger to perform the partial voltage balance function at the same time during the charging process.
Package Included:
1 battery balancer
1 English Manual