Reliable Heat Tape:
Input: 115-125V;
Length: 19ft;
Working Temperature: -40 to 105;
Output: 7W/FT;
Bending Radius: 1.96"; This gutter heater cable is made of 2pcs heating conductor and wrapped with PVC layer, braided copper. It is 105 temperature-resistant, anti-ultraviolet & wire-aging. More safe & durable than self-regulating heat cables.
Note: Include 10ft cold lead (cold lead is unheated).
Suitable Roof Types: Not all roofs can use the heat strips for roof, for the safety, it only accept inclined roofs, such as roofs with noncombustible tab shingles (like asphalt shingles) that meet national building codes, metal or plastic gutters/downspouts. It has a waterproof rate of IP 68.
Installation Positions: The ice dam heat cable should be installed on areas like the entire roof edge, specific areas such as beneath skylights, in valleys or around dormers, nearby gutters, downspouts and/or valleys. Pre-assembled, plug-in design, ready to install. Easy instruction manual, enough clips, and spacers are included.
Manuals & Notes: Different roofs need various install methods, thus we will offer you a clear user manual to guide you.
Note: Do not install this gutter heat cable to remove ice dams that have already formed or to clear the roof of ice and snow.
Wide Application Area: This gutter heater cable with the thermostat is suitable to use at cold places or in the winter. Help to prevent ice dams from forming, thus to protect your roof from damage and leaking, keep the water flowing in gutter & downspouts.