WiFi RJ45 Ethernet to RS232 RS485 Serial Server Converter 2.4GHz Support WatchDog Modbus Gateway TCP/UDP/HTTP IP P2P Chipset MTK

WiFi RJ45 Ethernet to RS232 RS485 Serial Server Converter 2.4GH z Support WatchDog Modbus Gateway TCP/UDP/HTTP IP P2P Chipset MTK

Ethernet/WIFI to RS232/RS485 server, realize Ethernet to serial port, two-way transparent data transmission between WIFI and serial port, support RS485 half-duplex transmission.


Through simple configuration via Web Server or setup software can assign working details, realize serial data and TCP/IP data package transparent transmission by converter.


Suitable for a variety of industrial application scenarios, provide PC and Android APK remote connection DEMO and source code, WIFI signal is sent and received through the antenna, which can realize long-distance communication



Description:



Model number: DW-TXB011

Chipset: MTK

UART port: 1 *RS232, 1*RS485

UART working mode: TCP server, TCP client, UPD, Virtual Serial port

WIFI Standard: IEEE 802.11. b/g/n

LED Indicator: WIFI, Link/ACT, Power, TX/RX

Baud rate: RS 232:300 bps~230400bps, RS 485: 300 bps~115200bps

Dimension: 78*72*23mm

Power Input: DC5V

Power Consumption: Max 1.5W



Environment


Operating Temperature: -20 -70

Relative Humidity: 10%-90%(non-condensing)

Storage Temperature: -40-85

Relative Humidity: 10%-90%(non-condensing)



Features:



Support WIFI 2.4GH z 802.11 b/g/n wireless standards.

Support TCP Server/TCP Client/UDP Server/UDP Client/HTTP Client mode.

Support RS232 and RS485 serial ports.

Support electrostatic protection.

Support timeout reset function, timing reset function.

Support Web Server, setup software, serial AT command to configure module.

Support hardware reload.

Support P2P remote

Support virtual serial port



Function Description




1. Serial to Ethernet


Ethernet is turned on, WIFI function is turned off; RS232 and RS485 data and Ethernet network data can be converted to each other through appropriate equipment; Ethernet can be configured with dynamic IP address (DHCP) or non-static IP address (STATIC)


User serial device cable




2. Serial port to WIFI client mode


Ethernet is turned off, WIFI function is turned on; WIFI works in CLIENT mode, through appropriate equipment, RS232 and RS485 data and WIFI network data are converted to each other; WIFI can be configured with dynamic IP address (DHCP), or can be configured with non-static IP Address (STATIC), WIFI security supports all current encryption methods.




3. Serial port to WIFI mode


Ethernet is turned off and WIFI is turned on; when working in AP mode, RS232 and RS485 data and WIFI network data are converted to each other through appropriate equipment; WIFI security supports all current encryption methods. Other WIFI devices are connected to the device and become devices under the local area network.



Package List:


1* Wifi&Ethernet to RS232&RS485 converter


1* Power adapter (The plug will meets your country standard)


1* RS232 Female cable


1* Antenna Cable