PCI Express 4X to USB3.1 Type A and USB3.1 Type C Riser card adapter with SATA 15pin Power Connector

Model number
TXB052
Chipset
ASMedia /ASM1142
Port number
1* USB3.1 TYPE-A+1*USB3.1 TYPE-C
Interface
PCI Express 4x slot
Dimension
90*60* 14mm
Support OS

Windows®10(32/64), 8/ 8.1 (32164), 7 (32/64), Vista(32/64), XP(32/64), 2000
Windows Server® 2012, 2008 R2, 2003(32/64)
Mac OS® 10.x (Intel based, tested up to 10.9)
Linux 2.4.x and later (Tested up to 3.5)
Environment
Operating Temperature: 0 'C-50 ®C
Relative Humidity: 10%-90%(non-condensing)
Storage Temperature: -0%C-80®C
Relative Humidity: 5%-90%(non-condensing)
Features
SuperSpeed USB 10 Gbps,
SuperSpeed USB 5 Gbps,
Hi-Speed 480 Mbps,
Full-Speed 12 Mbps,
Low-Speed 1.5 Mbps
Downwards compatible to USB 3.0, USB 2.0, USB 1.1
Power supply via PCI Express interface or via 15 pin power connector
Electrical power per port:
USB Type C: max.15 watt (+SV/3A)
USB Type A: max.4.5 watt (+5 V/ 900 mA)
Supports eXtensible Host Controller Interface (xHCI) specifications 1.1

Bridge PCI Express to USB3.1

Upload firmware through BIOS or external SPI ROM

Extemnal 20MHz differential crystal

Overclock capability on PCI Express bus under asynchronous mode

Integrate Spread Spectrum Controller for PCI Express and USB3.1 interface
Integrate two regulators for normal core power supply and suspend core power supply
Support driver on Windows7, Windows8, and Windows 8.1
Support various Linux kernels

PCI Express Feature
Support PCI Express Gen2 x2 or Gen3 x1
Up to 10 Gbps bandwidth performance with low latency

Support PCI Express Link power management
Compliant with PCI Express Base 3.0 Specification
Compliant with PCI Express Card Electromechanical 2.0 specification
Compliant with PCI Express Mini Card Electromechanical 1.2 specification
Compliant with ExpressCard Standard Revision 2.0
Compliant with PCI Bus Power Management Interface Specification Revision 1.2
Compliant with PCI Local Bus Specification Revision3.0
Support overclocking capability on PCI Express Interface
USB Feature
Support two ports of USB3.1
Compliant with Universal Serial Bus 3.1 Specification Revision 1.0
Compliant with Universal Serial Bus Specification Revision 2.0
Compliant with eXtensible Host Controller Interface specification Revision 1.1
Compliant with USB Attached SCSI Protocol Revision 1.0
Support USB3.1 and USB2.0 Link Power Management
Support Control, Bulk, Stream, Interrupt, lsochronous transfer type
Support independent port power control
Support over current detection
Support RemoteWakeup event

Backward compatible with Legacy USB function and device
Support the Debugport

Note
the main product (without affecting the normal use, the configuration has increased or decreased)
Compare the detail sizes with yours, please allow 1-3cm error, due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.