BONAEVER 39 Pin IDE to SATA Connector SATA IDE Adapter 3.5 HDD IDE / PATA Hard Disk Adapter Converter Card with Data Power Cable

Features:
1. Transform the IDE hard disk of the recorder to SATA and connect it to the SATA port of the motherboard.

2. Convert 3.5 -inch IDE hard disk to SATA, and connect it to the SATA port of the motherboard
3. IDE optical drive to SATA, connected to the motherboard SATA port

4. Transfer the IDE burner to SATA, then connect it to the SATA port of the motherboard

5. You can transfer the desktop 3.5 -inch IDE hard disk to the SATA recorder (please format the hard disk on the computer first).

6. The transferred hard disk can be used as a master disk or a slave disk (need to reinstall the system, refresh in BIOSS, etc. ).

7. The transferred optical drive can be used as a system.

8. The adapter card supports a parallel port hard disk with a maximum capacity of 1000G.

9. For IDE devices that use adapter cards, the jumper cap must be inserted in the MASTER position.

10. Compatible with SATA 1 generation, SATA 2 generation, SATA 3 generation

11. Plug and play, no driver required

Specification:
Product size: 6* 2.2CM
Product village materials: using PCB double-layer circuit board
Scope of use: used for IDE optical drives, burners, 3.5 -inch hard drives, recorder hard drives
Compatible system: compatible with windowsXp\win7\win8 32-bit\64-bit system

Packsge list:
IDE to SATA adapter card * 1
Power cord * 1