Visual Smart M.2 NVMe SSD Enclosure,Support 10s PLP Prevents Write Data Loss,USB 3.2 Gen 2 Type-C (10 Gbps),fits NVMe PCIe/SATA NGFF Size 2230/2242/2260/2280,Support M-Key B+M Key UASP

DOCKCASE M. 2 to USB enclosure fits NVMe PCIe/SATA AHCI NGFF size 2230/2242/2260/2280, support M-Key and B&M Key UASP (up to 2TB
SSD) Support Dual Heat Dissipation: In addition to supporting NVME and SATA, DOCKCASE RTL 9210B
In addition to supporting NVME and SATA, DOCKCASE RTL 9210B control chip is equipped with temperature control with can be up to 10 degrees lower than other chips, reducing heat generation from the source. The first cover with the graphite thermal pad increased the heat dissipation area and blow away the heat timely enabling your SSD to maintain high transfer speeds and extending its longevity.

Reasons to choose DOCKCASE Smart SSD Enclosure
Equipped with supercapacitor and Power Loss Protection (PLP) function.

The exclusive screen display is convenient to check the detailed information of the disk in time without worrying about data backup

One-touch display switching [D-Key button]

Dual heat dissipation: Aluminum body and RTL 9210B control chip design to ensure high-speed transmission and stable performance.

USB 3.2 gen 2 port supports and utilizes the maximum transfer speed of 10Gbps (theoretical value) to achieve high-speed transfer.

Compatible with M Key / B & M Key NVMe M. 2 SSD and B & M Key M. 2 SATA SSD (2230/2242/2260/2280)

SSD up to 2TB can be installed.

Upgradable firmware can be continuously optimized to improve the stability of working.

Equipped with 2in1 cable: USB-C to USB-C/A data cable, let you get rid of the embarrassment of limited interfaces.

The SSD case of DOCKCASE can maintain the optimum performance and take full advantage of SSD by the high-speed transfer protocol UASP.

Integrated design of aluminum alloy and tempered glass, sleek, durable, and convenient.

Exclusive D-Key control can switch between different pages to check SSD detailed info and select multiple functions, dispel your doubts about the status of the disk. When the health of the disk is too low, it is convenient to back up data or replace it with a new disk in time, never worry about data loss.

After our DOCKCASE Smart SSD Enclosure is powered on, you can operate the firmware of the SSD case with the D-Key button.

The specific operation is as follows,


1.
Homepage switching:

You can rotate the screen direction of the Enclosure by double-clicking the D-Key.

Press and hold the D-Key to display About Me on the display of this product and move to the interface.


2. Switching the
About Me interface:

Short press D-Key to switch control options.

Press D-Key for 3 seconds to apply / change the options on the right side of the cursor.

Note: If you do not operate within 10 seconds, you will automatically return to the homepage. The revised data will take effect after reconnecting.

SSD Installation Instructions and

Details

Dresentation
SSD Installation Instructions

Step 1: Loosen the screw on the back cover.

Step 2: Insert the SSD into the PCB board at a 30 degree angle.

Step 3: Tighten the SSD using screws.

Step 4: Tighten the screw on the back cover.

Sleek Yet Portable

Integrated design of aluminum alloy and tempered glass, sleek, durable and convenient. Space gray casing highlights the premium quality and perfectly match with various equipment for tech-savvy professionals. The fins cover prevents slips when held, the slim body easily slides in your pocket to enjoy maximized portability.