CJMCU-06 SPL06-001 Drone Pressure Sensor 300 -1200hPa Module Height Sensor Board Position Up to 5 CM for Arduino

Origin:CN(Origin)
Model Number:CJMCU-06 SPL06-001 Drone Pressure Sensor

SPL06-001 is a digital atmospheric pressure sensor miniaturized with high accuracy - a low current consumption. SPL06-001 is both a pressure sensor and a temperature sensor. The pressure sensor element is based on a capacitive sensing principle that ensures high precision during the temperature changes. SPL06-001 internal signal processor converts the output from the pressure - elements to 24-bit results. Each pressure sensor has been calibrated individually - contains the calibration coefficients. The coefficients are used in the application to convert the measurement results in real values pressure - temperature. SPL06-001 has a FIFO that can store the last 32 measurements. Using FIFO, the host processor can remain in sleep mode for a long time between reading.
Feature:
Pressure: 300 - 1200 hPa
Temperature: from -40 ° C to 85 ° C
Precision pressure sensor: ± 0,006 hPa (or ± 5 cm) (high precision mode)
Precision sensor pressure: ± 0.06 hPa (or ± 50 cm) (non-linearity), ± 1 hPa (or ± 8 m) (absolute)
Temperature precision: ± 0.5 ° C
Sensitivity temperature pressure:
Tempo measurement: typical: 28 ms. Minimum: Average current 3 ms
Consumption: High precision: 60 uA, Low Power: 3 uA, Standby:
Voltage power: VDDIO: 1,2 - 3,6 V, VDD: 1,7 - 3 was 6 operating V
Mode: Command (manual), Background (automatic) - Standby
Calibration: calibrated individually with the coefficients for correction measurement
FIFO: stores the last 32 measures pressure or temperatura
Interface: I2C - SPI (both with optional interrupt)
Size: 2.0 mm x 2.5 mm x 0.95 mm