BONAEVER Wireless Barcode Scanner 1D 2D with USB Cradle Charging Base H held Bar Code Reader Bar Code Scanner Automatic Sensing Fa Stand Precise Scanner

Features:

Charger/Stand/Receiver 3-in-1 Cradle: 1. Cradle houses 2.4 GHz wireless receiver. Once connected to computer via USB cable, unit is ready for work. 2. Work as you charge. Whenever scanner sits in cradle, charging automatically starts. 3.Cradle doubles as scanner stand for hands-free operation.

Always powered: Internal 2200mAh battery for extended standby time. While seated in cradle, scanner can operate continuously.

Button/ Continuous Mode: Pull trigger button to scan in Button Mode. Set scanner in Continuous Mode and operate hands-free with scanner seated in cradle.

Fast Accurate Reading Speed: 32 bit CPU, superior decoding capability.
Can recognize following codes: UPC/EAN, with complementary UPC/EAN, Code12, Code39, Code 39Full ASCII, Coda bar, industrial /Interleaved 2 of 5 Code93, MSI, Code11, ISB-N, ISSN, China post, etc. (optional) GS1 Databar, Code32; 2D: QR Code, Data Matrix, PDF417, Aztec code, Maxicode, etc.

IP54 Shock-proof: Can survive falls from heights up to 6.6 ft. The technical of IP54 sturdy which protect the wireless barcode scanner from dust and moisture.

Charger/Stand/Receiver 3-in-1 Cradle:
1. Cradle houses 2.4 GHz wireless receiver. Once connected to computer via USB cable, unit is ready for work.
2. Work as you charge. Whenever scanner sits in cradle, charging automatically starts.
3. Cradle doubles as scanner stand for hands-free operation.

Decode Capabilty:
UPC/EAN, Code128, Code39, Code 39Full ASCII, Coda bar, industrial/Interleaved 2 of 5 Code93, MSI, Code11, ISB-N, ISSN, China post, GS1 Data bar, Code32, etc.
2D: QR Code, Data Matrix, PDF417, Aztec code, Maxicode, etc. 2 Kinds of
Scanner Mode:
Key Trigger Mode: Red high speed laser reader when press the trigger provides fast accurate reading speed.
Continuous Scan Mode: set up continuous scan mode switch to automatic mode for quick scanning without pressing any buttons with scanner stand included which provide hands-free.

2200mAh Long Life Battery & Charging Cradle: With built-in 2200mAh rechargeable battery and the charging cradle, this wireless scanner can be always powered.

Anti-Shock Silicone: The orange silicone protective cover can avoid the scratches and friction while falling from the height of 6.6 ft.

2 Upload modes:
Instant Upload Mode & Storage Mode: when using the scanner far away the wireless signal range, activate storage mode, all scanned barcode will be stored directly into the bulit-in memory of the scanner.