Your Browsing History
12V 4Pin PWM Hub & 5V 3Pin ARGB Controller with SATA 15Pin Power 2-in-1 16 Way Sync CPU Cooling Fan Addressable RGB Lighting PCB Splitter for Extended Motherboard Interface & LED Strip -Black
Limited time offer, ends 01/30 By EN Labs Marketplace
- ARGB & PWM 2-in-1 16 Ways Controller Hub
- Support up to 16 sets motherboard ARGB sync
- Support 16 sets PWM 12V 4pin fan power
- Support Motherboard RGB sync automatic when the RGB cable connected to motherboard
- Built in high quality RGB controlling chipset, running 16 ARGB lighting effect automatic if motherboard does not support ARGB function.
- Support Lighting Effect Manual Control
- Magnetic standoff design for easily fixing the hub in the iron chassis
- PMMA case offers solid protection
- Does NOT work for 12V RGB components
- Motherboard PWM and 3pin ARGB Sync cable is included
+
+
Overview
Specs
Reviews (4)
Feature
This is ARGB PWM 2-in-1 16 way hub with Dual SATA 15pin power that can supply power to fans and ARGB devices at the same time.
Extend the motherboard interface of the chassis to solve the problem of insufficient motherboard interfaces.
Power by PSU SATA interface, reduce motherboard load, reduce motherboard overload and heat, widely used in PC computer water cooling systems and multiple RGB lighting controls.
Up to 16 sets of Addressable RGB (5V 3pin) plugs and 16 sets PWM (12V 4pin) plugs to meet your needs of connecting more devices.
Support simultaneous startup of 16 way fans, ARGB is all synced between all fans, one setting applies to all fans (speed and color).
The ARGB of this hub is 5V 3-pin. This type of fan can control a single lamp bead, and realize the effects of running water lamp, splicing and displaying text patterns through programming. Only compatible with 3pin 5V addressable RGB headers or controllers, don't connect to 12V RGB components, otherwise it might burn out.
Support Motherboard ARGB sync automatic when the 3pin ARGB cable connected to motherboard
Built in high quality RGB controlling chipset, running 16 ARGB lighting effect automatic if motherboard does not support ARGB function. No motherboard RGB supporting is needed.
The PWM Splitter supports PWM function and automatic fan speed adjustment. (3pin fans works too, run in full speed)
Magnetic standoff design for easily fixing the hub in the chassis
PMMA case offers solid protection
Installation Introduction:
1.Suitable for 12V 4PIN fan PWM speed regulation (3PIN fans can also be connected, but no PWM speed regulation function)
2.Insert the hub to Dual SATA interface of the computer power supply
3.The PWM cable is connected to the CPU fan socket of the motherboard. The computer CPU fan must be connected to the red 4PIN fan socket of the extender
4.Fix the hub on the inner wall of the chassis
This is ARGB PWM 2-in-1 16 way hub with Dual SATA 15pin power that can supply power to fans and ARGB devices at the same time.
Extend the motherboard interface of the chassis to solve the problem of insufficient motherboard interfaces.
Power by PSU SATA interface, reduce motherboard load, reduce motherboard overload and heat, widely used in PC computer water cooling systems and multiple RGB lighting controls.
Up to 16 sets of Addressable RGB (5V 3pin) plugs and 16 sets PWM (12V 4pin) plugs to meet your needs of connecting more devices.
Support simultaneous startup of 16 way fans, ARGB is all synced between all fans, one setting applies to all fans (speed and color).
The ARGB of this hub is 5V 3-pin. This type of fan can control a single lamp bead, and realize the effects of running water lamp, splicing and displaying text patterns through programming. Only compatible with 3pin 5V addressable RGB headers or controllers, don't connect to 12V RGB components, otherwise it might burn out.
Support Motherboard ARGB sync automatic when the 3pin ARGB cable connected to motherboard
Built in high quality RGB controlling chipset, running 16 ARGB lighting effect automatic if motherboard does not support ARGB function. No motherboard RGB supporting is needed.
The PWM Splitter supports PWM function and automatic fan speed adjustment. (3pin fans works too, run in full speed)
Magnetic standoff design for easily fixing the hub in the chassis
PMMA case offers solid protection
Installation Introduction:
1.Suitable for 12V 4PIN fan PWM speed regulation (3PIN fans can also be connected, but no PWM speed regulation function)
2.Insert the hub to Dual SATA interface of the computer power supply
3.The PWM cable is connected to the CPU fan socket of the motherboard. The computer CPU fan must be connected to the red 4PIN fan socket of the extender
4.Fix the hub on the inner wall of the chassis
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by EN Labs Marketplace Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...