4Pin PWM Hub & 5V 3Pin ARGB with SATA Power 2-in-1 8 Way Sync CPU Cooling Fan Addressable RGB Lighting PCB Splitter for Extended Motherboard Interface & LED Strip -PMMA Case

Feature

This is ARGB PWM 2-in-1 8 way hub with SATA power that can supply power to fans and ARGB devices at the same time.
Extend the motherboard interface of the chassis to solve the problem of insufficient motherboard interfaces.
Power by PSU SATA 15Pin interface, reduce motherboard load, reduce motherboard overload and heat, widely used in PC computer water cooling systems and multiple RGB lighting controls.
Up to 8 sets of Addressable RGB (5V 3pin) plugs and 8 sets PWM (12V 4pin) plugs to meet your needs of connecting more devices.
Support simultaneous startup of 8 way fans, ARGB is all synced between all fans, one setting applies to all fans (speed and color).
The ARGB of this hub is 5V 3-pin. This type of fan can control a single lamp bead, and realize the effects of running water lamp, splicing and displaying text patterns through programming.
Only compatible with 3pin 5V addressable RGB headers or controllers, don't connect to 12V RGB components, otherwise it might burn out.
Support Motherboard ARGB sync automatic when the 3pin ARGB cable connected to motherboard
The PWM Splitter supports PWM function and automatic fan speed adjustment. (3pin fans works too, run in full speed)
The adhesive on the back can be used to fix the hub in the chassis, tool-free installation, and not easy to drop.


Installation Introduction:

1.Suitable for 12V 4PIN fan PWM speed regulation (3PIN fans can also be connected, but no PWM speed regulation function)
2.Insert the hub to SATA interface of the computer power supply
3.The PWM cable is connected to the CPU fan socket of the motherboard. The computer CPU fan must be connected to the red 4PIN fan socket of the extender
4.Fix the hub on the inner wall of the chassis

Note

Only when the motherboard supports ARGB, the light can be turned on.
The computer CPU fan must be connected to the red 4PIN fan socket of the hub
The red interface on the hub must be connected fan high-priority to make sure PWM function working
Supports 3Pin fan as well, but just running in full speed.