The NA-IS1-14 Sx2 is a set of two 5mm thick intake side spacer frames for Noctua 140x25mm fans that can help to improve both acoustics and performance in suction or "pull" type applications where the fan draws air through obstacles such as grills, perforated plates, mesh panels, filters or radiators. By offsetting the fan from the obstacle, the NA-IS1 inlet spacer reduces influx turbulences, which can, depending on the application and fan model, not only improve airflow but also significantly reduce overall noise levels and make the fan sound more pleasant to the ear. Designed to replace the fan's stock NA-AVP1 anti-vibration pads, the NA-IS1-14 are compatible with all current square-frame Noctua 140x25mm fans and extremely straightforward to install. In sum, the NA-IS1-14 Sx2 set is a simple yet highly effective fine-tuning measure for suction type applications where a reduction of influx turbulence can lead to improved airflow and acoustics.
More airflow, less noise
Reducing influx turbulences doesn't only improve acoustics, it also helps fans to operate more efficiently from an airflow performance point of view. In many suction-type applications, using inlet spacers can therefore enable fans to achieve both higher flow rates and lower noise emissions.
Improving suction acoustics
| Suction applications where fans draw air through obstacles such as grills or perforated panels are notoriously challenging acoustically due to the turbulences caused by these obstacles. Introducing a 5mm off-set between the fan and the obstacle, the NA-IS1 spacers can reduce these turbulences, which often improves noise levels and/or noise profiles significantly. |
|
Compatible with all current Noctua 140x25mm fans
| Replacing the fan's stock NA-AVP1 anti-vibration pads, the NA-IS1-14 are compatible with all current Noctua square-frame 140x25mm fans such as the popular NF-A14 or NF-P14s redux series. Fans from other manufacturers are not supported. |
|
Anti-vibration mounts and fan screws
| The NA-IS1-14 Sx2 is a set of two spacer frames plus the matching anti-vibration mounts, fan screws and radiator screws - ideal for equipping e.g. two 140mm intake fans in the front of a PC case or two 140mm fans on a 280mm radiator that's installed in a front intake position. |
|
Scope of Delivery
- 2x NA-IS1-14 chromax.black inlet spacers for 140mm fans
- 8x NA-AV3 chromax.black anti-vibration mounts
- 8x NM-SFS4-BK long fan screws
- 8x NM-SFS5-BK radiator screws (M3)
- 8x NM-SFS6-BK radiator screws (UNC)
Please note:
As influx turbulences vary between different fans models and setups, it is not possible to reliably predict how much of an improvement adding inlet spacers will make. Please see our performance guidelines for further information.
| Products |
|
|
|
|
| Colour |
Beige & Brown |
Black |
Beige & Brown |
Black |
| Quantity |
x2 |
x2 |
x2 |
x2 |
| Fan Compatibility |
Noctua 120x25mm square fans |
Noctua 120x25mm square fans |
Noctua 140x25mm square fans |
Noctua 140x25mm square fans |
