DC-DC 600W Step Up 12V-60V to 12V-80V Power Apply Module High-Power

Module parameter:

Module name: 600W step up constant current module.
Module property: Non-isolated step up module (BOOST).
Input voltage: two options for input voltage (selection by jumper cap in PCB):
1>. 8V-16V(use for 12V storage battery or three series Li-Poly battery). IN this mode, input voltage must not beyond 16V, otherwise module must be damaged.
2>. 12V-60V
Inout current: 16A (max) please use heat sink if input current beyond 10A
Static working current: 15mA
Output voltage: 12V-80V (adjustable)
Output current: 0.1A -12A (please use heat sink if output current beyond 10A)
Working temperature: -40 ^o C~+85 ^o C
Working frequency: 150KHz
Transfer efficiency: 95% (max)
Over current protection: Yes
Short circuit protection: Yes
Input reverse connect protection: NO
Output reverse connect protection: NO
PCB size: 76x60x56mm

Set method of constant current and constant voltage:
1.
Set output voltage: if selection 9V-12V, please use jumper cap.
2.
Set output current:
1>. adjust CV potentiometer, adjust output voltage.
2>. keep anticlockwise rotate CC potentiometer in 300 circle, set the minimun current Then selection. Then connect to load, adjust CC potentiometer to set output current that you want.