RGB for Full Colour Control
The P14 PWM PST A-RGB has 12 digital A-RGB LEDs in the fan scar. These can be controlled independently of each other and are compatible with the common A-RGB standards of leading motherboard manufacturers. The fan can thus be fully illuminated directly via the A-RGB mainboard connector or via an external controller and synchronised with the illumination of other hardware.
0dB Mode - Zero RPM
The speed of the fan can be throttled down to standstill via PWM. This allows silent operation in IDLE and at the same time promises maximum performance when required.
Optimised for high static pressure
The P14 PWM PST A-RGB operates with a focused airflow and a high static pressure. The fan thus promises extremely efficient cooling, even with increased air resistance, and is therefore suitable for use on heat sinks, radiators and filters.
200 to 1900 RPM (0 RPM <5 %) controlled via PWM PST
With a wide speed range and the innovative PWM Sharing Technology (PST), the fan speed of the P14 PWM PST A-RGB can be controlled synchronously with all other fans. This reduces noise to a minimum while promising maximum cooling performance.
P14 PWM PST RGB 0dB
Technical
Specifications
Performance and Fan
Fan Speed: 200 - 1900 rpm PWM controlled (0 rpm below 5% PWM)
Airflow: 68.9 CFM/ 117.06 m³/h
Static Pressure: 2.00 mm HO
Noise Level: 0.3 Sone
Fan Frame: Standard
Control Type: PWM PST
Connector: 4-Pin-Connector + 4-Pin-Socket
Fan Bearing: Fluid Dynamic Bearing
Operating Ambient Temperature: 0 - 40 °C
Electrical Characteristics
Typical Voltage: 12 V DC
Starting Voltage: 5 V
Current/Voltage: 0.17 A | 12 V
Cable Length: 400 mm
RGB
Specifications
LEDs: 12 A-RGB LEDs
Connector: 3-Pin 5V-DI-GND Connector
Current/Voltage: 0.4 A | 5 V
Cable: 450 mm cable with 80 mm sharing cable, black
Size & Weight
Length: 140 mm
Width: 140 mm
Height: 27 mm
Weight: 210 g