CP2102 USB to TTL UART Data Transfer Converter Module Development Board

Description:

Single-Chip USB to UART Data Transfer

• No external resistors required, no external crystal required
• On-chip power-on reset circuit and voltage regulator
• Integrated 1024-Byte EEPROM

USB Function Controller

• USB Specification 2.0 compliant; full-speed (12 Mbps)
• USB suspend states supported via SUSPEND pins

UART

• All handshaking and modem interface signals
• Data formats supported: Data
  bits: 5, 6, 7, and
  8.
  Stop bits: 1, 1.5, and
  2.
  Parity: odd, even, no parity.
• Baud rates: 300 bps to 1 Mbits
• 576 Byte receive buffer; 640 byte transmit buffer
• Hardware or X-On/X-Off handshaking supported
• Event character support

Virtual COM Port Device Drivers

• Windows 8/7/Vista/Server 2003/XP/2000
• MAC OS-X/OS-9
• Linux 2.40 or higher

USB
Xpress Direct Driver Support

• Windows 7/Vista/Server 2003/XP/2000
• Windows CE

Temperature Range

• –40 to +85 °C

• Supports Mac, Linux, Android, Win
  CE, Windows 7/8/ 8.1 /...
  
• Voltage output support: 5V or 3.3V
• Integrated USB protection device: SP0503
• 3 LEDs: TXD LED, RXD LED, POWER LED
• Pins accessible on pin headers: TXD, RXD, RTS, CTS
• Other pins are accessible on drilled holes, easily connected to user application system (separate pin headers are provided)
  

How to Use (In the case of working with a MCU):

• VCCIO: 3.3V or 5V output (the module is powered from USB, onboard jumper should be shorted to 3.3V or 5V)
• GND: connects to GND
• TXD: connects to MCU. RX (signal direction: MCU. RX << CP2102 << PC.TX)
• RXD: connects to MCU. TX (signal direction: MCU. TX >> CP2102 >> PC. RX)
• RTS: connects to MCU. CTS (signal direction: MCU. CTS << CP2102 << PC.RTS)
• CTS: connects to MCU. RTS (signal direction: MCU. RTS >> CP2102 >> PC. CTS)
• Note: Please contact me for Development Resources if needed.

What's in the Package:

• 1pcs CP2102 USB UART Board
• 1pcs 4Pin Pin Header Male
• 1pcs 4Pin Pin Header Female
• 1pcs 6Pin Custom Connector Jumper Wire