PCI Express 3.0 x16 to x16 Riser Cable Jumpers TX to Tx Direct Flat Extension Cable TX to RX Signal Swap PCIe 16x Gen3.0 Cables 128G/bps Support GTX1080ti GTX2080ti RX5700xt RTX3060 (25cm,R33NL)

If your applications uses a mother board that needs to link to another PCB via PCIe, and that PCB has PCIe connectors instead of edge fingers, then this PCIe Jumper Assemblies may fit your need. All of the speed and flexibility of the original Extender Assemblies, but for card-to-card applications.For model R33SF/SL/SR, the distance between the positioning screw holes is 10.8cm.
Imported wire with German patent, connector imported from Taiwan, support PCIe 3.0 full speed stable transmission.Wire impedance is low, line length within 60 cm support PCIe3.0 full speed,128G/bps (Max).The length of the wire refers to the part of the visible wire. It does not include the PCB and the connector.
The differential signal has no hole design, and there is no signal attenuation interference problem of parasitic capacitance and parasitic inductance, and no CAF micro-short circuit phenomenon. The product is durable.PCB dwarfing and fatten design, dwarfing will not be stuck to the graphics card, fatten and lengthening design makes the board card easier to install, reduce the probability of damage.
The products are made of high quality materials, PCB is made of fine workmanship, copper is thickened to 1oz, gold finger has enough gold plating content and good electrical conductivity, which can reduce the problem of dead blue screen caused by increased oxidation rust impedance.
The wire selected by the product itself is very durable, the use of the thickness of 3mm PCB gasket protection in the metal welding point, and lock the screw and hexagon nut fastening, the product is solid and reliable tensile resistance, anti-interference, there will not be broken wire nail problem.The thickness of the wire is 1.4mm, can be bent or folded, do not affect the use.