X79 BTC Mining Motherboard 9 Graphics Slot 60mm Pitch Support RTX 3060 GPU Support E5-2603 E5-2609 E5 4607 V2 CPU

Bundle:Motherboards
Quality Certification:NONE
Chipset:AMD A88
Socket Type:LGA 1366
Storage Interface Type:SATA
Item Condition:
Onboard LAN:1x RJ45
Package:Yes
Model Number:as discribed
Application:Mining
With CPU:Yes
Special Function:NONE
Maximum Ram Capacity:16 GB
Chipset Manufacturer:Intel
Back I/O Ports:1x RJ45
Support Memory Type:DDR4
Usage Scenario:Gaming
Number of PCI:3
PCI - E standards:PCI - E 4.0
Origin:CN(Origin)
Certification:NONE
Colour:as shown
Material:PCB metal
Size:59.5x19.4CM

X79 BTC Mining Motherboard 9 Graphics Slot 60mm Pitch Support RTX 3060 GPU Support E5-2603 E5-2609 E5 4607 V2 CPU
Installation instructions: E5-26xx/46xx V1 and V2 CPUs (not included) must be used, and two CPUs of the same model must be used on a motherboard. Using server memory can reduce the cost of memory.
The power supply is recommended to be placed on the upper side of the fan, which can reduce the length of the chassis; and the power supply line can be directly plugged into the motherboard without switching. Pay attention to the direction when installing the CPU heat sink. Reverse installation will cause the CPU to become hot.
Display interface: Fix the third slot display (C slot) on the right under DOS; if you encounter the phenomenon that the display cannot, just unplug the decoy head on the graphics card.
Core values: Support 4G discrete graphics card mining, RX570 4G computing power 18HM; Support 3060 discrete graphics card, computing power 48MH.
Mainboard power supply access method: 1, 2, 3, 6 ports output power to the graphics card, mainboard 4, 5, 7, 8, 9 ports are power input; A, B, C, D, E 5 graphics cards directly power Power supply. The motherboard must use 4 violent fans to dissipate heat, otherwise the high temperature of the graphics card will reduce the life span and increase instability.
For Xeon Processor E5-2603, E5-4603, E5-2609, E5-2603 V2, E5-4603 V2, E5-2609 V2, E5-2620, E5-2620 V2, E5-4607 V2, E5-2618L V2
Operation guide for installing the heat sink
1.Take out the motherboard, place the work surface, and remove the CPU heat sink.
2.Open the CPU bracket, buckle the two sides of the CPU protective cover with your thumb and middle finger, slightly lift the thumb side until the protective cover is released from the buckle, and then hang again.
3.Clean the CPU contacts until they are not dirty, confirm that the foolproof grooves correspondi.
Colour: as shown
Material: PCB + metal
Size: 59.5x19.4CM
Package Contents:
1 * Motherboard (Different batches will have different product appearances, which will not affect the use)
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.