M2 SSD Case NVME SSD Enclosure M.2 to USB 3.1 Type A Hard Drive Enclosure Case for 2230 2242 2260 2280 NVME PCI-E M Key SSD Disk

Origin:CN(Origin)
Type:Cable Adapter
Package:Yes
Products Status:STOCK
Certification:NONE
Model Number:AC4806
Product name:M.2 NVMe SSD USB adapter
Note:This is just a case, not include any ssd drive
Support M.2:nvme ssd
Support M.2 Interface:M key NVMe M.2

M2 SSD Case NVME SSD Enclosure M.2 to USB 3.1 Type A Hard Drive Enclosure Case for 2230 2242 2260 2280 NVME PCI-E M Key SSD Disk
About Description:
Product model: NVMe SSD Enclosure
Main Chipset: Jmicron JMS583
Protocol: NVMe
Connector: USB3.1 TYPE-A
Case Color: Black
Interface: USB3.1 TO M.2 KEY-M
HDD Enclosure size: 108mm*25mm*8mm
Support: for 2230, 2242, 2260, 2280 m.2 ssd
Application : for 3D Game, 4K video ,HIFI Music, RAM Picture ect.
Support system: WinXP/Vista/Win7/Win8/WIN10 32-bit/64-bit MAC10.8 or higher
Features:
1. JMS583 Main Chip
2. Supports TRIM to the SSD
3. Integrates with USB Type-Amultiplexer& configuration channel(CC)logic
4. Complies with PCI Express Base Specification Revision 3.1a
5. Complies with NVM Express 1.3
6. Complies with USB3.1 Gen 1 and Gen 2 Specification,USB Mass Storage Class,Bulk-only Transport Specification(Revision 1.0)
7. Complies with USB Attached SCSI Protocol(UASP)Specification(Revision 4)
8. Supports USB Super-Speed/High-Speed/Full-Speed Operation
9. Supports USB2.0/USB3.1 Gen 1/2 power saving mode
10. Supports external SPI NVRAM for Vendor VID/PID of
11. USB2.0/USB3.1 Gen 1/2 device controller
12. Thirteen GPIOs for customization
13. Provides hardware controlled PWMs
14. Provides software utilities for downloading the upgraded firmware code under USB2.0/USB3.1 Gen1,2
15. Design for Windows 7,Windows 10 and MAC 10.10.5 or later version
16. Supports 25MHZ external crystal
17. Supports 3.3V I/O
18. Embedded 5V to 1.0V voltage regulator
19. Embedded 5V to 3.3V linear voltage regulator(LD0)
Warm Tips:
1. Only hard disk boxes, SSD hard disks are not included.
2. Only NVMe PCI-E M.2 M-Key SSD is supported. (B-Key M.2 SSD based on SATA and PCI-E M.2 SSD based on AHCI are not supported)
You'll receive:
1 x M.2 NVME SSD to USB 3.1 Adapter
1 x Thermal Pad
1 x Screwdriver
Please check pictures for more details.