M.2 NGFF A+E E Key WIFI Wireless Module Network Card To MINI PCIE WiFi Adapter

Type:Modular Adapters
Origin:Mainland China

100% and
Material: ABS+Metal
Color: see picture
Size: Length 5cm/1.96in, Width 2.9cm/1.14in
Package Includes:
1PC Wireless Network Card
Support hot swap, plug and play.
Does not require additional power adapters and any drivers
M.2 NGFF to Mini PCIE desktop wireless network card high-speed interference-ultra-low delay
Support and design for: Mini PCI-E slot Note: Only support KEY A+E to PCI-E (single Key E interface cannot be used)
Compatible with Wireless Wifi Bluetooth Compatible Cards, such as Intel 3160NGW 7260NGW 8260NGW 8265NGW 9260NGW AX200NGW etc.
1: This product only supports wireless modules of A+E key and A key M.2 NGFF PCIE protocol wireless network card type.
2: Some M.2 NGFF wireless network cards only support Windows 10 operating system (such as 9560AC, 9560NGW, 9260AC, 9260NGW only support win 10 system). Some M.2 NGFF wireless network cards do not support AMD motherboards (for example, 9560AC and 9260AC do not support AMD motherboards). This is just the model that has been tested so far. There are so many models on the market that I cant test all of them. So if the driver is installed but cant be used, please understand each other.
3: HP, Dell and Lenovo ThinkPad computers have whitelist restrictions, not all M.2 NGFF wireless network cards can be used. Before buying a wireless network card, you must communicate clearly with the seller of the wireless network card! Also, please note that the M.2 NGFF wireless modules disassembled from HP, Dell and Lenovo ThinkPad computers may not be compatible if installed on other brands of computers!
3: The adapter card does not need any driver, because the adapter card does not have any chip, so there is no so-called driver and compatibility issues, what you need to install is the driver of your own wireless network card module itself, wireless If the network card module has no driver or the driver is installed incorrectly, it cannot work normally!
4: The riser card only changes the interface form of the wireless module, and does not change any performance of the module, because to put it bluntly, it just connects a few wires from your module! What function did your module have, and what function is it after the transfer? There are many compatibility issues with the wireless network card module.
Notice! ! This riser card does not support any CNVI protocol wireless modules! If the mini pcie interface of your machine is plugged into a hard disk, it will definitely not be recognized! Not the same as the interface can be used!
Special statement: Regarding Bluetooth: Whether the wireless module Bluetooth can be used depends on two reasons, one is whether your wireless module has Bluetooth function, the other is whether your computer MINI PCIE wireless interface integrates a USB signal line, The two are indispensable, this transfer card can support the Bluetooth function (the transfer card has a USB signal cable connected from the wireless module).
Note:
1. Please allow 5-10mm differences due to manual measurement, thanks.
2. The actual color of the product may be slightly different from the picture, and the website is caused by various factors such as the brightness of the monitor and the brightness of the light.