BONAEVER 2.5 Inch Hard Drive Case USB 3.0 External Hard Drive Enclosure Enclosure SATA I II III HDD SSD 9.5mm 7mm [UASP Support] Tool Free Black

Features:

External hard drive case supports 7mm / 9.5mm HDD, Suitable for 2.5 "SATA SSD, with capacity up to 6TB, backward compatible with USB 2.0.

Easy installation: tool-free, 2.5 hard disk case supports Hot-Swap, plug and play, USB self-powered, no reboot and additional adapter or drive. After installing a 2.5-inch hard drive, it's connected in seconds and ready to use.

Powered by USB ports, 2.5 usb 3.0 sata hdd box with fireproof and impact resistant ABS material, ABS material fully protects hard drive from falling and weakens impact force.

Systems Compatible: Windows XP / Windows / windows 10 / Mac OS, Linux and etc.

Package Contents: 1x USB 3.0 SATA 2.5 HDD Case, 1x USB 3.0 Cable

2.5 Inch Hard Disk Case, USB 3.0 External Hard Drive Enclosure Box SATA I II III HDD SSD 9.5mm and 7mm [UASP Support] Tool Free (Black)

Supports all 2.5 '' SATA I / II / III SSD HDD, compatible with hard drives with thickness from 7mm to 9.5mm

This 2.5 "SATA III enclosure is up to 70% faster than a normal USB 3.0 connection when combined with a UASP-enabled host controller.

Innovative design, over-current, over-voltage, overheating, electrical leakage, short-circuiting and parasitic echo prevention

Output: USB 3.0 Micro B (compatible with USB 2.0 or 1.1)

Dimension: 125 x 79 x 13mm (4.92 * 3.1 * 0.5in)

Material: Made of high strength ABS explosion proof material

Supported System: Windows 2000 / XP / Vista / 7/8/10 (32/64-bit), Mac 10.x, Linux OS and more

Package contents:

1x External Hard Drive Case 2.5 "

1x USB 3.0 cable

Super Speed UASP Support
External drive case for 2.5 "SATA SSD and HDD supports UASP and USB 3.0 interface With fast data transfer from USB 3.0 up to 5Gbps, HD movies can be transferred in seconds, but note that the speed actual transmission is limited by the setting of the connected device.

Simple Assembly Without Tools
Tool-free installation, hot-swap plug and play, LED indicator

Installation Phase:

1: Pull back the back cover.

2: Insert the hard disk case into the case and close the cover.

3: Connect the hard disk case enclosure to the laptop.

Opening tip: Not only pull, but also press lightly, so the blanket is easier to open.

Great Compatibility
Support all 2.5 '' SATA I / II / III SSD HDD, compatible with hard drives with thickness from 7mm to 9.5mm. Supports 6TB max.

Convenience
It has an LED indicator. Once connected, no reboot is required and no additional driver is required.

Innovative design
The vibrating case with flame retardant and impact resistant ABS material makes it easy to identify which hard drive is inside and has been designed to be a beautiful addition to your desk.