Amify GPU Backplate Radiator Memory Cooler Aluminum Panel + Dual PWM Fan VRAM Heatsink Graphics Card Backplane For RTX 3090 3080 3070 Radiator With 1mm Thermal Pad 500

Description: Anodized black CNC machining, standard dual fan design. Good compatibility, the thickness of the radiator body is 15 mm. Support graphics card vertical installation.
PS: The actual installation needs to be equipped with a thermal pad. It is directly in contact with the metal backplate and cannot conduct sufficient heat. The actual installation height is 15mm of the heat sink + the thickness of the thermal pad.
Function: Solve the high-temperature problem of 3090 graphics card backplate memory.
Integrated Backplate Radiator: This does not need to be patched together, easy to install.
Adjustable Speed Fan: Standard dual 5010 fans, up to 20CFM under full load, low-noise hydraulic bearings, PWM speed control possible, both dynamic and static.
Feature: The fan cable is a 4pin interface, which is the same as a normal chassis fan and is connected to a fan socket such as SYS FAN on the motherboard. It can be booted into the motherboard BIOS to adjust the speed, the speed range is 1500~5000 rpm, which can be adjusted arbitrarily. About the Choice of
Thermal Pad: The graphics card backplate is flat: 0.5 mm thick thermal pad is recommended. The graphics card backplate is uneven: 1mm thermal pad is recommended.
Specifications: Item
Name: GPU Backplate Radiator
Model Number: GK6
Color: Black
Thermal pad optional: 1mm pad 500 / 0.5 mm pad 600 / 1mm pad 600 / 0.5 mm pad 700 / 1mm pad 700
Body material: Aluminum alloy
Body size: 90*180*15mm
Fan model: 5010 bracket
Fan speed: 1500-5000±5%
Fan interface: Small 4pin, PWM speed adjustable
Fan air volume: 10.3CFM ± 5% (single)
Fan pressure: 25mm / H20 ± 5% (single)
Bearing type: Sleeve bearing
Wire length: 400mm ± 10mm
Application: Graphics
Card Bearing: Oil Bearing
Fan Life: 40000 hrs
Noise: 27.5 dBa
Lines: 1
Lines Type: Heat sink
Power Interface: 4pin
Fan: 2 pcs 50 cm
Application: For RTX 3090 3080 3070 Series Graphics Card Installation Steps Step 1: Give an alcohol sheet to wipe the back of the graphics card to remove dust.
Step 2: Tear off the thermal pad and stick it flat on the back of the radiator.
Step 3: Paste the backplate heat sink to the video memory position of the graphics card backplate.
Step 4: Fix the backplate radiator
1. If the graphics card is flat-mounted, the thermal pad has a large area and has a certain adsorption force, so you can use it directly
2. If the graphics card is installed vertically, you can use the nylon cable ties or high temperature-resistant rubber bands to fix it. Be careful not to fix the rubber band or cable tie to the inside of the longitudinal slot of the radiator. Too thin will affect the pressing force of the radiator.
Note: -There might be 1-3 cm error of size for manual measurement. -The color's deviation might differ due to different monitor settings, please kindly understand. Packing list 1 x Radiator 1 x Thermal pad (1mm pad 500) 10 x Cable tie 10 x High temperature resistant rubber band 2 x Gloves 6 x Wipe paper