10-Port Poe Switch 48 V Power Over Ethernet Network Switch 802.3 AF / to for IP Camera / Wireless AP / CCTV Camera System

10-Port Poe Switch 48 V Power Over Ethernet Network Switch 802.3 AF / to for IP Camera / Wireless AP / CCTV Camera System

Features                                               

1.Ten 10/100Mbps Power Over Ethernet Port

2.1-10 Port: 10/100M auto sensing RJ45 port

3.Max. 30W for each PSE/PoE Port (Port 1~8)

4.Switch Mode:

a.Mode 1(Standard): Port 1~10: 10/100M auto-sensing @ 100 meters

b.Mode 2(Extend): Port 1~8: 10M @ 250 meters; Port 9~10: 100M @ 100 meters

c.Mode 3(VLAN): Port 1~8: 100M @ 100 meters; Port 9~10: 100M @ 100 meters; Ports

5.  1 to 8 will be isolated from each other, but will still be able to communicate with uplink port 9 and 10.

6.  Auto-detect full/half-duplex, MDI/MDI-X

7.  IEEE 802.3x flow control for full-duplex and back-pressure flow control for half-duplex

8.  Store and forward

9. Fanless design

10. Rugged metal enclosure

Industry Standards IEEE 802.3af/at, IEEE 802.3, IEEE 802.3u, IEEE 802.3x

Performance Bandwidth 1.6G

Buffer Size 1M

MAC Size 1K

Flow Control Full duplex flow control

Switching Architecture Store-and-Forward

Connector(s) Connector Type(s) 10 x 10/100M RJ45 Ports

Port 1~8: IEEE 802.3AF/AT PoE port

Software OS Compatibility OS Independent; No additional driver or software required

Indicators LED Indicators

1 Power (Green)

1 Extend (Green)

1 VLAN (Green)

8 PoE Status (Blue)

10 Link/Activity (Green)

Power Source DC Adapter Included

Environmental Humidity 20~80% RH

Operating Temperature 5°C to 50°C (41°F to 122°F)

Storage Temperature -25°C to 70°C (-13°F to 158°F)

Procuct Introduction