USB 3.0 to IDE and SATA Converter External Hard Drive Adapter Kit for Universal 2.5/3.5 HDD/SSD Hard Drive Disk, One Touch Backup Function, Included 12V/2A Power Adapter

AUBEAMTO sata and ide to usb 3.0 adapter supports 2.5"/3.5" HDD/SSD, 2.5"/3.5" IDE, 5.25" DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW Optical Drive; Hard drive converter is retrieve old files, backup, cloning and data recovery device tools. This converter allowing connect to three hard disk drives simultaneously. 

• Universal USB Hard Drive Adapter: AUBEAMTO sata and ide to usb 3.0 adapter supports 2.5"/3.5" HDD/SSD, 2.5"/3.5" IDE, 5.25" DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW Optical Drive; Hard drive converter is retrieve old files, backup, cloning and data recovery device tools. This converter allowing connect to three hard disk drives simultaneously.
• 5Gbps High Speed Transfer: IDE to usb adapter supports super speed USB 3.0 enables data transfer rates of up to 5Gbps, data transfer is super simple and easy, backward compatible with USB 2.0 / USB 1.1. External hdd hard drive reader support Windows XP/Vista/7/ 8.1/ 8/10, Mac OS 10 or higher, Linux, etc. (The actual transmission speed subjects to the setting of the device connected ).

Notice

1. For 3.5" IDE drivers and old SATA HDD, you need to connect 12V 2A power adapter and 4-pin power cable provided. Attention please turn on the switch on IDE adapter in the last step.

2. Please try to use the 1 meter USB 3.0 data cable provided instead of the other long data cable.

3. If the device cannot be read, try connecting the data cable to your computer's rear USB port.

Supported Hard Drives : 2.5"/3.5" SATA HDD and SSD, 2.5"/3.5" IDE up to 6TB max and DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW Optical Drive.

Operating system : Windows XP/Vista/7/8/10, Mac OS and Linux.

For 2.5"/3.5"/5.25" SATA Device

1. Please make sure on/off switch is off before connecting to HDD,incorrect connection may cause damage to your hard drive or electrical shock.
2. No external power required for 2.5" SATA HDD.

 

For 3.5"/5.25" PATA(IDE) Device

1. Built-in IDE power connector,for easy access of 3.5" or 5.25" IDE Driver.
2. Plug IDE power connector to the IDE hard drive.
3. Set drive jumper to master single drive mode.
4. For jumper settings,please refer to your hard drive manufacturer's documentation.

 

For 2.5"PATA(IDE) Device

1. External power is not required for most 2.5"IDE HDD.