SSK Aluminum Hard Drive Docking Station, USB 3.0 to SATA Dual Bay External HDD Dock Caddy Reader for 2.5 & 3.5 inch SATA HDD SSD, with UASP Offline Cloner/Duplicator Function(2x16TB Supports)

SSK USB 3.0 to SATA I/II/III Dual Bay External Hard Drive Docking Station for 2.5 / 3.5in HDD, SSD with Hard Drive Duplicator/Cloner Function
Before you clone, please noted:
The target drive have to be at least equal or larger in capacity than the source drive.
Please confirm your source drive and target drive both can work properly, and target drive have no data. If you have existing data on the target drive, the cloning process will eliminate your target drive's data. Because the target drive will be cloned to be the same as the source drive, partition, format and data are the same too.
If you have existing data both on the target drive and the source drive, and your want to save the data on your target drive at the same time, Please connect to the computer and transfer the data of your target drive to the source drive, then you can enjoy offline drive-to-drive cloning.

Attention:
Please do not directly unplug the drives that is cloning data. The correct way is when cloning process is complete , you will hear the'Bang noise'for three times, At this time you can eject your drives.
When your hard drive is transferring data with the computer, please do not directly unplug the hard disk when the data transfer is not completed. The correct way is to eject the drive from the computer when your data transfer is complete.
Once there is corrupt data behavior, please contact our SSK service immediately to update the latest firmware for you.

Avoid the two hard drives influence each other:
--After clone, please noted:
For better to protect your drive data and prolong the service life of the hard disk, please press the HDD dock power switch to the OFF position.

--After transferring data on computer, please noted:
For better to protect your drive data and prolong the service life of the hard disk, please eject your drives from the computer, and then press the HDD dock power switch to the OFF position.


SSK Aluminum Dual Bay Docking Station one click clone
SSK HDD docking station is not compatible IDE drives.It compatible with all 2.5 inch and 3.5 inch SATA HDD and SSD.
AttentionThis HDD docking station DK103 is our updated design. We put the CLONE Button on the front according to the user's opinion.
Note: Due to the hard disk properties,please timely backup your data stored on the Hard disk In case of loss.
Package Includes:
1x SSK DK103 Docking
1x USB 3.0 Cable
1x 12V/2.5A Power Adapter
1x User Manual
SSK Aluminum Dual Bay External Hard Drive Docking Station can copy your files from one disk to another without computer support. The Dual Dock provides simultaneous access to both drives, uses external power for stable drive performance and supports hot-swapping so you won't need to reboot your computer.
Supports UASP technology,UASP is a new transport protocol, which can increase data transfer speed, up to 70% faster than conventional USB 3.0. Transfer 1G files only within 10 seconds.
Compatible HDD:2.5/3.5 inch
Max HDD Capacity:16TB
Maximum data transfer rates:5 Gbps
Material:Aluminum+ ABS Plastic(Excellent heat dissipation)
Item Dimensions:5 x 3.8 x 2.8 in
To use Hard Drive Offline Clone Function:
1. Insert Source Disk into hard drive bay A, then insert Target Disk into hard drive bay B.
2. Make sure that the USB cable is disconnected from your computer.
3. Connect power supply and switch on power.
4. Hold down the CLONE button , release when you see all lights flashing.
5. Then quickly press the CLONE Button.
6. A Yellow LED will flash on 25% indicating that the cloning process has begun.
7. The cloning process is complete when you hear the'Bang noise'for three times (25%-100%).
8. Finally press the power switch to the OFF position and eject your drives.
With push button operation and plug and play installation, the clone button has been specially desi