Computer Case Gaming PC Case ATX Mid-Tower Tempered Glass Side Panel Computer Chassis Desktop Case Support ATX,Micro-ATX,ITX,Pre-Installed 6 PCS 120mm SRGB Fans,Front Side Mesh Intakes,7+3 Expansion

ACAMYRPG Computer Case Gaming PC Case ATX Mid-Tower Tempered Glass Side Panel Computer Chassis Desktop Case Support ATX,Micro-ATX,ITX,Pre-Installed 6 PCS 120mm SRGB Fans,Front Side Mesh Intakes,7+3 Expansion Slots,High Airflow Mesh


Maximum Cooling Potential:


Beyond ordinary mesh gaming pc case, the easy-to-open glass side panel delivers over 76% improved cooling when the panels are open for ample airflow.


Unique Panel Design:


The unique mesh front panel and tempered glass side panel show the internal parts of your case in all directions, and improve the airflow performance. Front side: panel + iron mesh ; Left side: left side toughened glass + back side silk-screened bezel ; Right side: iron side panel + black sand.


Ultimate Thermal Performance & Tempered Glass Panel:


The computer case with tempered glass side panel possessing magnetic buckle and metal pull ring is easy to install the hardware, and can be opened at any time, Omni-directional heat sink,Fully ventilated panel;Long row of cooling holes on the right side;Cooling holes at the bottom of the panel,provide more airflow and cooling,improving the ultimate thermal effect, which improves 76% of the cooling effect than the non-opening panel case.


Pre-installed 6 PCS 120mm SRGB dazzling silent case fan:


Pre-installed 3pcs 120mm SRGB fans in the front and 1pcs fans in the rear, 2 pcs fans in the top, provide your case the excellent cooling, colorful lights and unlimited color transformation. Suitable for enhanced cooling. With the pre-installed SRGB fan control board you can sync it with the motherboard, each addressable SRGB fan offers 16.8 million colors for exceptional customizable lighting. You don't need to pay extra for fans.


SRGB dazzling silent case fan


SRGB Fan


Vibration reduction and low noise 18dBA


9-blade airflow 31.68CFM


Safe speed 1200/min


SRGB dazzling light effect:


new SRGB color, high brightness LED light beads, new RGB color interpretation, easy to create a dazzling host


Vibration-damping design, silent and efficient:


The fan is surrounded by silicone vibration-damping pads made of gentle material to absorb vibrations at high speeds, which is suitable for various complex installation scenarios and efficiently completes wind power transmission.


Rifle Bearing:


SRGB dazzling silent chassis fan adopts Rifle Bearing technology, high oil content hollow bearing, bearing life can reach more than 40,000 hours, and the noise is as low as 18dBA, meeting the noise standard of recording studio.


9-blade threaded, strong wind pressure:


9-blade fan blade with threaded design to achieve 31.68CFM output airflow at 1200 rpm standard, which can effectively optimize the chassis air duct, silent dust removal.


Power supply options:


humanized power supply interface design, motherboard small 3Pin plug-in and power supply D-type port 4Pin two interfaces.


Warm tips:


large 4Pin interface can be more than one series; small 3Pin and large 4Pin, only one can be connected, can not be connected at the same time.


Diversified Cooling System.


Air Cooling System:


3*120mm/3*140mm/2*200mm fans on the front panel;


2*120mm/2*140mm fans on the top;


1*120mm/1*140mm fans on the rear;


Water Cooling System:


the front supports water cooling up to 360mm;


the top supports water cooling up to 280mm;


the rear supports water cooling up to 140mm;


Efficient Cooling Solution


Support 280mm water cooler on the top and 140mm water cooler on the rear, up to 6pcs fans, it provide the best airflow and keep your case cooling all the time, bring you extreme gaming atmosphere.


Short Body But Ample Space:


Mid-tower case can easily install ATX / Micro-ATX / Mini-ITX. Graphics Card supports 330mm, the CPU Height is 175mm, which can meet a variety of CPU coolers. The chassis also provides multiple hard drive fixing positions, supporting the installation of 3 x 2.5" SSD+1 x 3.5" HDD or 2 x 2.5" SSD+2 x 3.5" HDD.


Multifunctional I/O Panel


With USB3.0, USB2.0 x 2, HD Audio, Reset button offer you the best convenience to their gaming system and offers the ease of use to access the PC.


7+3 expansion slots.


High tower 7+3 expansion slots to meet your expansion needs, game high frame, more realistic picture quality, support vertical installation of graphics cards


Product Details


Motherboard Compatability: ATX/ Micro-ATX/ ITX


Item Dimensions: 400 x 475 x 225mm


CPU Cooler Max Height: 175mm


GPU Max Length: 330mm


Hard Drive Mounting Method: Hard Drive Cage, Side Mounted


DRIVES: 2 x 2.5" SSD + 2 x 3.5" HDD or 3 x 2.5" SSD + 1 x 3.5" HDD


EXPANSION SLOTS: 7+3 Expansion Slots.


I/O Panel: USB3.0 x1/ USB2.0 X2 / HD Audio / Power / Reset


Air Cooling System:


3*120mm/3*140mm/2*200mm fans on the front panel;


2*120mm/2*140mm fans on the top;


1*120mm/1*140mm fans on the rear;


Water Cooling System:


the front supports water cooling up to 360mm;


the top supports water cooling up to 280mm;


the rear supports water cooling up to 140mm;


Power Support: Maximum Support for Standard ATX Power Supply


Package includes: Computer Case *1, SRGB Fans *6, Manual *1