Primary Ports: 48 x 10/100/1000 ports, maximum or 16 x 1/10 GbE SFP+ ports, depending on model, all supporting MACSec
8 x HPE Smart Rate Multi-Gigabit (1/2.5/5/10GBASE-T) ports, available on select model
2 x open I/O module slots, maximum, depending on model
PoE / PoE+ on selected models
Buffer Memory: 13.5MB Internal
Power: 100-240V AC
Depending on installed options, model and configuration
Interface: 1 x Gigabit Ethernet (RJ-45) Port (Support IEEE 802.3af PoE and Passive PoE)
Standards: IEEE 802.11ac, IEEE 802.11a/b/g/n
Security: Captive Portal Authentication
Access Control
Wireless Mac Address Filtering
Wireless Isolation Between Clients
SSID to VLAN Mapping
Rogue AP Detection
802.1X Support
WAN Ports: (1) 2.5 GbE RJ45 port
(1) 10G SFP+ port
LAN Ports: (8) GbE RJ45 ports
(1) 10G SFP+ port
LEDs: Ethernet: Green: link/activity
SFP+: Green: link/activity
HDD: White: disk activity
Amber: disk error
RPS: Blue: ready
VPN: WireGuard, L2TP and OpenVPN server
OpenVPN client
OpenVPN and IPsec site-to-site VPN
One-click Teleport and Identity VPN
Policy-based WAN and VPN routing
Interface: 1 x Gigabit Ethernet (RJ-45) Port (supports IEEE802.3at PoE)
Standards: IEEE 802.11ax/ac/n/g/b/a
Security: Captive Portal Authentication§
Access Control
Wireless Mac Address Filtering
Wireless Isolation Between Clients
SSID to VLAN Mapping
Rogue AP Detection
802.1X Support
WPA-Personal/Enterprise, WPA2-Personal/Enterprise, WPA3-Personal/Enterprise
Interface: One gigabit Ethernet RJ-45 port (Support 802.3af PoE and Passive PoE)
Standards: IEEE 802.11ac, IEEE 802.11a/b/g/n
Security: Captive Portal Authentication
Access Control
Wireless Mac Address Filtering
Wireless Isolation Between Clients
SSID to VLAN Mapping
Rogue AP Detection
802.1X Support
Specifications: Interfaces
Telephone Interfaces Two (2) FXS ports
Network Interfaces One (1) 10/100Mbps auto-sensing ethernet ports (RJ45)
LED Indicators POWER, INTERNET, PHONE1, PHONE2
Factory Reset Button Yes
Voice, Fax, Modem
Telephony Features Caller ID display or block, call waiting, flash, blind or attended transfer, forward,
hold, do not disturb, 3-way conference
Voice Codecs G.711 with Annex I (PLC) and Annex II (VAD/CNG), G.723.1, G.729A/B, G.726, iLBC,
dynamic jitter buffer, advanced line echo cancellation
Fax Over IP T.38 compliant Group 3 Fax Relay up to 14.4kpbs and auto-switch to G.711 for Fax
Pass-through
Short/Long Haul Ring Load 2 REN: Up to 1km on 24 AWG
Caller ID Bellcore Type 1 & 2, ETSI, BT, NTT, and DTMF-based CID
Disconnect Methods Busy Tone, Polarity Reversal/Wink, Loop Current
Signaling
Netwo...
WAN Ports: 1 x 10G/Multi-gigabit Copper (Configurable LAN/WAN)
1 x 2.5G/1G RJ-45 (WAN)
LAN Ports: 3 x 2.5G/1G RJ-45 (LAN)
1 x 10G/1G SFP+ (LAN)
VPN: IPSec Site-to-Site
Throughput: LAN-WAN Throughput: 2.4Gbps for 2.5G WAN port. 9.4Gbps for 10G WAN port
WAN-LAN Throughput: 10Gbps max WAN with 17.5Gbps max LAN, when using WAN2 port. 2.5Gbps max WAN with 27.5Gbps max LAN, when using WAN1 port only