"km switch"

• Type: D-Sub, USB
• Computer Connections: 1 Port
• Monitor Connections: 1 Port
• Video Resolution: 1600 x 1200
• Model #: KA7175

• Device Type: Transceiver
• Network Media: SMF
• Wavelength: 1330nmTx/1270nmRx
• Ports: LC
• Model #: SFP-10G-BXD-I-ST

• Device Type: Converter
• Standards: IEEE 802.3u 100BASE-LX IEEE 802.3ab 1000BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3x full-duplex flow control IEEE 802.3 10BASE-T IEEE 802.1q VLAN pass through
• Wavelength: 1310nm
• Fiber Cable: Single-mode Optical Fiber
• Model #: MCMGBSCSM10

• Specifications: Pro3000 Analog Toner Specifications User interface: Slide switch selects Continuity or Tone Mode Push button switch selects SOLID, ALT or OFF Tone mode LED Continuity/Polarity LED Solid Frequency: 1000 Hz nominal Alternating Frequency: 1000/1500 Hz nominal Over Voltage Protection: 60 Vdc in Toner/Polarity Mode Output Power in Tone Mode: 8 dbm into 600 ohms Output Voltage Level in Continuity Mode: 8 Vdc with fresh battery Battery: 9V alkaline Temperature: Operating: -20° C to 60° C, Storage: -40° C to 70° C Pro3000 Analog Probe specifications User interface: ON/OFF pushbutton Volume dial Replaceable tip 3.5 mm earphone jack Battery: 9V alkaline Temperature: Operating: -20° C to 60° C, Storage: -40° C to 70° C
• Parts: 1 year limited
• Model #: 26000900

• Device Type: SFP+ Transceiver Module
• Wavelength: 1310nm
• Fiber Cable: Single-mode Optical Fiber
• Ports: 10GBase-LR
• Model #: J9151E-ST

• Device Type: Converter
• Standards: IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-FX IEEE 802.3u 100BASE-TX
• Wavelength: 1310nm
• Fiber Cable: Multi-mode Optical Fiber
• Model #: MCM110SC2

• Standards: IEEE 802.3z 1000BASE-LX / LH
• Wavelength: 1310nm
• Fiber Cable: Single Mode / Multi Mode
• Protocols: TCP/IP
• Model #: GLCLHSMDST

• Standards: IEEE 802.3ae 10 Gbit/s
• Wavelength: 1310nm
• Fiber Cable: Single Mode
• Protocols: TCP/IP
• Model #: SFP10GLRST

• Device Type: Transceiver
• Wavelength: 1310nm
• Fiber Cable: Single Mode Fiber
• Ports: LC
• Model #: AR-SFP-10G-LR-ST

• Part Number: SFPG1320C
• Compatible Brand: Cisco Firepower Switches: IE2000 IE4000 C9300 IE3000
• Device Type: Transceiver
• Form Factor: Hot-pluggable Hot-swappable
• Model #: SFPG1320C

• Device Type: Transceiver
• Standards: IEEE 802.3z 1000BASE-LX
• Wavelength: 1310nm
• Fiber Cable: Single Mode / Multi Mode
• Model #: J4859CST

• Device Type: Transceiver
• Standards: IEEE 802.3z 1000BASE-LX
• Wavelength: 1310nm
• Fiber Cable: Single Mode
• Model #: MASFP1GBLX10

• Device Type: Transceiver
• Wavelength: 1310nm
• Fiber Cable: Single Mode Fiber
• Ports: LC
• Model #: 455886-B21-ST

• Device Type: Transceiver
• Standards: IEEE 802.3z 1000BASE-LX
• Wavelength: 1310nm
• Fiber Cable: Single Mode
• Model #: GLCLXSMRGDST

• Device Type: Transceiver
• Standards: IEEE 802.3z 1000BASE-EX
• Wavelength: 1310nm
• Fiber Cable: Single Mode
• Model #: GLCEXSMDST

• Computer Connections: 4 Ports
• Model #: E-T06-9

• Type: USB
• PC Connectors: 2 PCs
• Computer Connections: 2 Ports
• PC Selection: Manual Switch
• Model #: Q2557_B

• Computer Connections: 4 Ports
• Model #: E-T05-9

• Type: USB
• PC Connectors: 2 Computers
• Computer Connections: 2 Ports
• PC Selection: Manual Switch
• Model #: C05#Q1800_B

• Computer Connections: 4 Ports
• Model #: W-T06-7

• Computer Connections: 4 Ports
• Model #: W-T05-7

• Type: Keyboard/mouse
• Console Connectors: Keyboard/mouse: USB Type A female Switched USB: USB 2.0 Type A female Audio: 3.5-mm stereo jack Other: Modular 10p10c for flash upgrade and channel switching commands
• Dimensions: 17.05" x 6.22" x 0.22"
• Weight: 6.2
• Model #: KV0008A-R2

• Type: Computer Accessories
• Weight: 1.2500
• Model #: P4A20132-KM-SWITCH

• Model #: 1-KVM-Switch0165

• Type: USB
• PC Connectors: USB 3.0
• Computer Connections: 2 Ports
• PC Selection: Manual Switch
• Model #: Z1#Q2681_B

• Type: Accessories
• Model #: ID-FGR39

• Type: HDMI, USB
• Video Resolution: 3840 x 2160
• LED Indicators: Yes
• Dimensions: 5.43 x 5.35 x 1.46 inches
• Model #: E-OZD15D16-1

• Type: Adapter
• Specifications: Interfaces: Telephone Interfaces Two (2) FXS ports Network Interfaces One (1) 10/100 Mbps auto-sensing ethernet ports (RJ45) LED Indicators POWER, INTERNET, PHONE1, PHONE2 Factory Reset Button Yes Voice, Fax, Modem: Telephony Features Caller ID display or block, call waiting, flash, blind or attended transfer, forward, hold, do not disturb, 3-way conference Voice Codecs G.711 with Annex I (PLC) and Annex II (VAD / CNG), G.723.1, G.729A/B, G.726, iLBC, OPUS, dynamic jitter buffer, advanced line echo cancellation Fax Over IP T.38 compliant Group 3 Fax Relay up to 14.4kpbs and auto-switch to G.711 for Fax Pass-through Short / Long Haul Ring Load 2 REN: Up to 1 km on 24 AWG Caller ID Bellcore Type 1 & 2, ETSI, BT, NTT, and DTMF-based CID Disconnect Methods Busy Tone, Polarity Reversal / Wink, Loop Current Signaling: Network Protocols...
• Model #: GS-HT802

• Color: Grey
• Type: Dash Cams
• Screen Size: 1.5"
• Image Sensor: CMOS
• Model #: E1-G

• Size/Dimensions: 5.35 x 3.46 x 2.2 inches
• Item Count: 1*KONNWEI KW206 Auto Diagnostic Scanner 1*User's Manual in English 1*OBD2 Cable 1*USB Cable
• Energy Star Qualified: Energy Star Qualified
• Selling Unit: Set
• Model #: W-KW206-11

• Features: KW206 OBDII Code reader Function and Features : 1. Works on ALL OBD II Enabled vehicles, both Gasoline and Diesel cars - domestic and imported. 2. Features the unique patented One-Click Readiness Key for quick State Emissions readiness check and drive cycle verification. 3. Bright color coded LEDS indicators and built-in speaker provide both visual and audible tone for readiness verification 4. Retrieves generic (P0, P2, P3 and U0), manufacturer specific (P1, P3 and U1) codes and pending codes 5. Easily determines the cause of the Check Engine Light(MIL) 6. Turns off Check Engine Light (MIL), clears codes and resets monitors 7. Enhanced OBD2 Mode 6 On Board Monitoring Test Results for Specific Monitored Systems. 8. Views freeze frame dataThe KONNWEI KW206 OBD2 / EOBD / CAN Car Diagnostic Scannersupports all 10 OBDII test modes on all OBDII compliant vehicles for ...
• Model #: J-KW206-4

• Compatible Brand: HPE
• Device Type: Transceiver
• Model #: S0G21A

• Standards: IEEE 802.3z 1000BASE-LX / LH
• Network Media: Media Type Supported: Optical Fiber Fiber Mode Supported: Multi-mode Single-mode Ethernet Technology: Gigabit Ethernet Network Technology: 1000Base-LX/LH
• Wavelength: 1310nm
• Fiber Cable: Single Mode / Multi Mode
• Model #: GLCLHSMD10ST

OUT OF STOCK

• Device Type: Transceiver
• Standards: IEEE 802.3z 1000BASE-LX
• Wavelength: 1310nm
• Fiber Cable: Single-mode Optical Fiber
• Model #: SFP1000LXST

OUT OF STOCK

• Type: Data Transfer Cable
• Connector Number: 1
• Connector Detail: Connector on First End:1 x Type A Male USB Connector on Second End:1 x Type A Male USB
• Electrical Outlet Plug Type: Plug Type “A” (USA, Canada, Mexico, Japan)
• Model #: SVKMS2

OUT OF STOCK

• Standards: IEEE 802.3z 1000BASE-LX/LH
• Wavelength: 1310nm
• Fiber Cable: Single Mode / Multi Mode
• Protocols: TCP/IP
• Model #: SFPGLCLHSMST