Specifications: 4Kn Support: Yes
Hot Swap Capability: Yes
Insertion Rating: 50,000 cycles
Max Drive Capacity: Currently tested with up to 10TB 7200 RPM hard drives
Maximum Data Transfer Rate : 6 Gbps
S.M.A.R.T. Support: Yes
TRIM Support: Yes
Type and Rate: USB 3.0 - 5 Gbit/s / SATA III (6 Gbps)
UASP Support: Yes
Specifications: Item: M. 2 SSD to USB 3.1 Type A Adapter Board. Material: PCB Board. Protocol: B-Key and M-Key. Input: M.2 SSD Slot, both B-Key and M-Key M.2 SSD (NVMe, SATA Based). Output: USB 3.1 Type A. Dimension: 115*25*6 mm. Transfer Speed: 10Gbps/ 5Gbps (NOTE: If connect with usb 3.0 type a port, speed will be 5Gbps).
Specifications: M.2 to USB Enclosure, RIITOP M2 SSD to USB 3.0 Card Reader with Case is Compatible with Both NVMe (PCI-e Channel) & B+M Key (SATA Channel) SSD, allows adding NVMe or B+M Key M.2 SSD to your PC via USB 3.1/3.0 Type-A Port at perfect performance Chipset and Speed - Adopt Realtek 9210B Master chip, USB3.1 GEN2 transmission. It will be reduced to USB 3.0 Speed if connecting to USB 3.0 Type-A but not USB 3.1 Type-A Port Compatible with M.2 SSDs (NVMe and B+M key SATA): 80x22mm, 60x22mm and 42x22mm. Compatible with M.2 SSDs (NVMe and B+M Key SATA): 80x22mm, 60x22mm and 42x22mm. Such as PM961, 960EVO, such as Samsung 970 EVO /950Pro/ 960Evo/ XP941/ PM951/ PM961/ SM951/ SM962, WD Black NVMe SSD; and Samsung 860 EVO, WD SATA M.2 SSD Note: This M2 SSD adapter adopts M key Socket, but can support ...
Specifications: Chipset ID: JMicron - JMS580
Drive Size: 22mm - M.2 SATA
Supported Drive Height(s): 2242 / 2260 / 2280
Compatible Drive Types: M.2 (SATA, B-Key, NGFF) / M.2 SATA (NGFF, B+M-Key)
Maximum Data Transfer Rate: 6 Gbps
MTBF: 50,000 hours
TRIM Support:Yes
Type and Rate: USB 3.1 Gen 2 - 10 Gbit/s, SATA III (6 Gbps)
UASP Support: Yes
Drive Connectors: 1 - M.2 (SATA, B-Key, NGFF) Receptacle
Host Connectors: 1 - USB Type-C (24 pin) USB 3.1 (10Gbps) Male
Note:
Not compatible with M.2 NVMe or AHCI PCI-Express SSDs
Windows 7 and earlier Windows versions do not support TRIM with USB to SATA devices.
Specifications: Maximum Data Transfer Rate: 6 Gbps
Type and Rate: SATA III (6 Gbps)
Max Drive Capacity: Currently tested with up to 6TB 7200 RPM 3.5" hard drives per bay and 1TB 7200 RPM 2.5" hard drives per bay