PC Tools & Testers

• Quantity: 20-piece
• Specifications: Power Supply: 2 x AAA Batteries (included) Speed: 110 RPM Output Torque: 0.25 - 0.35 N.m Supported Bit Size: 4mm Included Bit Size: H4x28mm Color: Silver Product Height: 0.6 in [16.0 mm] Product Length: 7.1 in [18.0 cm] Weight of Product: 8.8 oz [250.0 g] Product Width: 0.6 in [16.0 mm] Materials: Aluminum Included Bits: Philips (crosshead) PH000, PH00, PH0, PH1 Slot (flathead) SL1.0, SL1.5, SL2.0 Torx T5 Torx Security T6, T8 Hexagonal H2.5, H3.0 Pentalobe P20.8, P51.2, P61.5 Spanner U3.0 Tri Wing Y0.6, Y2.5 Triangle 3.0 Robertson S0
• Package Contents: Precision Screwdriver 20 Piece Bit Set Demagnetizer Quick-Start Guide AAA Battery
• Model #: CTK20PCEDRIVE

Limited time offer, ends 03/31

• Model #: DZ-Tools-44

• Specifications: Test Services: Detects IntelliTone digital signal and 1 kHz signal from analog toners. Features a CABLEMAP capability that identifies common cable miswires such as opens, shorts, and reversed pairs in twisted pair cabling. Ports: 1 x RJ-45 10/100Base-TX Network Connectivity Media: Twisted Pair Coaxial 10/100Base-TX Status Indicators: 8 LED indicators 1 Synch LED indicator Batteries: Alkaline Battery Battery Life: 20 Hour Typical Input Voltage: 9 V DC Battery Temperature: 32°F (0°C) to 104°F (40°C) Operating -4°F (-20°C) to 140°F (60°C) Storage Dimensions: 8.73" x 1.88" x 1.26" Package Contents: IntelliTone 200 Probe RJ-11 and RJ-45 patch cables Lanyard Owners CD Quick start guide 9 volt battery Additional Information: POTS telecom service available Altitude: 3000 m Operating Relative Humidity: 95 % (50 °F to 95 °F ; 10 °C to 35 °C) 75 % (95...
• Model #: MT-8200-63A

• Specifications: Pro3000 Analog Toner Specifications User interface: Slide switch selects Continuity or Tone Mode Push button switch selects SOLID, ALT or OFF Tone mode LED Continuity/Polarity LED Solid Frequency: 1000 Hz nominal Alternating Frequency: 1000/1500 Hz nominal Over Voltage Protection: 60 Vdc in Toner/Polarity Mode Output Power in Tone Mode: 8 dbm into 600 ohms Output Voltage Level in Continuity Mode: 8 Vdc with fresh battery Battery: 9V alkaline Temperature: Operating: -20° C to 60° C, Storage: -40° C to 70° C Case dimensions: 2.7 in. x 2.4 in. x 1.4 in. (6.9 cm x 6.1 cm x 3.6 cm) The Pro3000’s ergonomic sleek design is easy to handle and use. The large speaker on the probe makes the tone easier to hear through walls, enclosures, wood or plaster. A recessed on/off button helps prevent the probe from accidentally bei...
• Model #: 26100900

• Specifications: Network (RJ-45):No Number of Batteries Supported:3 Product Type:Testing Device
• Package Contents: T020-001-PSF Multi-Function Optical Fiber Cable Tester 3 x AA Batteries Cleaning Swabs Carrying Case Owner's Manual
• Model #: T020-001-PSF

• Specifications: Test Services: Graphical wiremap, length, cable ID, and distance to fault displayed on one screen. Tests all common media types including RJ11, RJ45, Coax, with no need for adapters. Locates virtually any cable or wire pair with IntelliTone digital and analog toning. Verifies today's media services, including 10/100/1000 Ethernet, POTS, and PoE. Integrated rubber holster enhances grip and makes it durable enough for the toughest jobs. Large, backlit LCD makes results crystal clear whether in bright sunshine or in a dark closet. Length Measurement: 11.81" to 1509 ft Ports: RJ-45 10/100/1000Base-T Network Connectivity Media: UTP Display Screen: Monochrome LCD with backlight Batteries: AA Standard Dimensions: 3.00" x 6.40" x 1.40" Weight (Approximate): 12.80 oz
• Package Contents: 78522N
• Parts: 1 year limited
• Labor: 1 Yea...
• Model #: MS2-100

• Specifications: Test Services: Fault Display High Speed Testing Generation of two tones for tracing cables and locating hidden cables Length Measurement: 15.75" to 656 ft Twisted Pair Ports: 1 x RJ-45 Status Indicators: 5 green LEDs for pairs and shield display 6 red LEDs (TONER, SHORT, REVERSED, MISWIRE, SPLIT PAIRS, and LOW BATTERY) Batteries: Alkaline AAA Features Features Auto-sleep mode Generation of two tones for tracing cables and lication hidden cables Packaging Package Contents MicroMapper MT-8200-49A Network Testing Device MicroMapper Remote Patch Cable 6-Volt Alkaline Battery User Guide The MicroMapper quickly and easily tests twisted pair cabling, giving you visibility of opens, shorts, crossed, reversed and split pairs. Just push the TEST button and MicroMapper will automatically scan all wire pairs for any existing faults...
• Model #: MT-8200-49A

• Specifications: Included in Package: Black leather holder Instruction Manual Remote Cable Tester LED Indicators: Battery condition Center conductor Conductor indicators Connected or 25 Ohm detected No cable / No terminator Non-parallel or 50 Ohm detected Shielding Short circuit detected Product Height: 25 mm [1 in] Product Length: 180 mm [7.1 in] Product Weight: 250 g [8.8 oz] Product Width: 110 mm [4.3 in] Shipping (Package) Weight: 0.4 kg [0.9 lb]
• Model #: REMOTETEST

• Specifications: Network (RJ-45):Yes Number of Batteries Supported:2 Product Type:Testing Device
• Package Contents: T012-001-K Testing Device Remote Probe Unit RJ45 Jumper Cable RJ11 Jumper Cable Alligator Clip Adapter Headphones 2 x 9V Batteries Carrying Case Owner's Manual Wire Tracker Tone Generator
• Model #: T012-001-K

• Quantity: 55-piece
• Specifications: Power Supply: 2x AAA Batteries (included) Speed: 110 RPM Output Torque: 0.25 - 0.35 N.m Included Magnetic Work Pad Size: 7.9 in [20cm] x 3.7 in [9.5 cm] Supported Bit Size: 4mm Included Bit Size: H4x28mm (50 bits) H4x45mm (5 bits) Color: Silver Product Height: 0.6 in [16.0 mm] Product Length: 7.1 in [18.0 cm] Weight of Product: 8.8 oz [250.0 g] Product Width: 0.6 in [16.0 mm] Materials: Aluminum Included Bits: Philips (crosshead) H4x28 PH0000, PH000, PH00, PH0, PH1, PH2 Philips (crosshead) H4x45 PH0, PH2 Slot (flathead) H4x28 SL1.0, SL1.5, SL 2.0, SL2.5, SL3.0, SL3.5 Slot (flathead) H4x45 SL2.5 Torx H4x28 T2, T3, T4, T5 Torx Security H4x28 T6, T7, T8, T9, T10, T15, T20 Hexagonal H4x28 H0.7, H0.9, H1.3, H1.5, H2.0, H2.5, H3.0, H3.5, H4.0 Hexagonal H4x45 H2.0, H2.5 Pentalobe H4x28 P2(0.8), P5(1.2), P6(1.5) Spanner H4x28 U2.0, ...
• Model #: CTK55PCEDRIVE

• Quantity: 56-piece
• Specifications: Reversible Ratchet Handle 5pcs Socket Set: 3/16”, 1/4”, 5/16”, 11/32”, 3/8” 5pcs Socket Set: 6, 7, 8, 9, 10 mm 14pcs Assorted Bits: Slotted:4, 6mm Philips:PH1, PH2 Pozi:PZ1, PZ2 Star:T8, T10, T15, T20, T25 Square : S0, S1, S2, S3 1 pc Adapter Bit for Socket Bit Holder 9pcs Allen Wrenches 6pcs Precision Screwdriver Set Soldering Iron IC Extractor 5" Wire Cutter / Stripper 4 1/2" Side Cutter 5" Long Nose Pliers Solder Reel Solder Wick Flashlight Battery Knife 3-Claw Parts Retriever Reverse Action Tweezers Electronic Tape Electronic Voltage Tester Blow Mold Case
• Model #: STK-2856

• Model #: RS-0421

• Model #: HD#392526106205

• Part Number: 108138
• Features: The Tester Consists Of A Main Master Unit And A Detachable Remote Unit, Each Of Which Have An Rj11 And An Rj45 Jack
• Model #: 8138

• Model #: CAPCP880948546231

• Model #: CAPCP880948548747