Features: Function :
System voltage 12 Volts and Voltage test in waveform
Test Result Good, Recharge or Replace
Capacity Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating. Internal resistance value (mO) and Life in percentage (%)
Cranking system and Charging system
Record and re-play battery data, Life-time free update service
Battery test, cranking test, charging test and other additional functions.
The major battery standards CA,CCA,BCL,MCA,JIS,SAE,EN,GB,DIN and IEC are supported.
Feature :
Measure Standard ,CCA 100-2000 ,BCI 100-2000 ,CA 100-2000 ,MCA 100-2000,
JIS 26A17-24SH52 ,DIN 100-1400 ,IEC 100-1400 ,EN 100-2000 ,SAE 100-2000,
GB 100-1400,System Voltage 12 Volts ,Input Voltage Range 8V-16V ,Power Requirements are no internal batteries required,Power on when hooked up during testing.
Features: KW650 Battery Load Tester Key Features
1. Strong Capacity: Works on 6V&12V batteries, battery ratings from 100 - 2200 CCA, also starter and alternator;
2. Test Multiple Battery Types: regular flooded, AGM flat plate, AGM spiral and gel;
3. Color screen, support both in-vehicle and out-of-vehicle test, no need to remove the battery;
4. Test Standards: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE and GB;
5. Test result: SOH, SOC, CCA value, CCA rating, voltage, internal resistance, etc;
6. Provide reliable results within seconds, display suggestion according to the testing results (Good, Recharge, Replace), detects bad cells directly;
7. Polarity reverses connection protection; reminder light
8. Support 12 languages: English, Russian, French, Spanish, German, Italian, Portuguese, Dutch, etc.
9. Print data & Lifetime free update service;
10. Suitable for automobile fac...
Features: 1.Universal works with all OBDII/EOBD& CAN compliant cars, light trucks (12V only), SUVs and minivans. NOTE: CAN NOT work on hybrid or electric cars.
2.Read engine fault codes and show definitions. Easily find out the root of check engine light (MIL) before going to repair shop or fix by yourself.
3.Clears codes, turn off the MIL and resets monitors.
4.Hotkey I/M readiness allow you to get the emissions readiness status.
5.Display complete live data stream in digits and graph format, RGB color screen allow you to compare 4 live readings to find out any suspicious parameters.
6.Read freeze frame data which shows engine conditions such as fuel trim, engine coolant temp, etc when the Malfunction Indicator Lamp (MIL) was triggered.
7.Multi-language menu options —English, Spanish, French, etc.
8.Advanced O2 sensor test, EVAP test, Modes 8 Test; Model 6 on-board monito...
Features: 1.Universal works with all OBDII/EOBD& CAN compliant cars, light trucks (12V only), SUVs and minivans. NOTE: CAN NOT work on hybrid or electric cars.
2.Read engine fault codes and show definitions. Easily find out the root of check engine light (MIL) before going to repair shop or fix by yourself.
3.Clears codes, turn off the MIL and resets monitors.
4.Hotkey I/M readiness allow you to get the emissions readiness status.
5.Display complete live data stream in digits and graph format, RGB color screen allow you to compare 4 live readings to find out any suspicious parameters.
6.Read freeze frame data which shows engine conditions such as fuel trim, engine coolant temp, etc when the Malfunction Indicator Lamp (MIL) was triggered.
7.Multi-language menu options —English, Spanish, French, etc.
8.Advanced O2 sensor test, EVAP test, Modes 8 Test; Model 6 on-board monito...
Features: 1.Universal works with all OBDII/EOBD& CAN compliant cars, light trucks (12V only), SUVs and minivans. NOTE: CAN NOT work on hybrid or electric cars.
2.Read engine fault codes and show definitions. Easily find out the root of check engine light (MIL) before going to repair shop or fix by yourself.
3.Clears codes, turn off the MIL and resets monitors.
4.Hotkey I/M readiness allow you to get the emissions readiness status.
5.Display complete live data stream in digits and graph format, RGB color screen allow you to compare 4 live readings to find out any suspicious parameters.
6.Read freeze frame data which shows engine conditions such as fuel trim, engine coolant temp, etc when the Malfunction Indicator Lamp (MIL) was triggered.
7.Multi-language menu options —English, Spanish, French, etc.
8.Advanced O2 sensor test, EVAP test, Modes 8 Test; Model 6 on-board monito...
Features: 1.Universal works with all OBDII/EOBD& CAN compliant cars, light trucks (12V only), SUVs and minivans. NOTE: CAN NOT work on hybrid or electric cars.
2.Read engine fault codes and show definitions. Easily find out the root of check engine light (MIL) before going to repair shop or fix by yourself.
3.Clears codes, turn off the MIL and resets monitors.
4.Hotkey I/M readiness allow you to get the emissions readiness status.
5.Display complete live data stream in digits and graph format, RGB color screen allow you to compare 4 live readings to find out any suspicious parameters.
6.Read freeze frame data which shows engine conditions such as fuel trim, engine coolant temp, etc when the Malfunction Indicator Lamp (MIL) was triggered.
7.Multi-language menu options —English, Spanish, French, etc.
8.Advanced O2 sensor test, EVAP test, Modes 8 Test; Model 6 on-board monito...
Features: 7. Views freeze frame dataThe KONNWEI KW310 OBD2 / EOBD / CAN Car Diagnostic Scanner supports all 10 OBDII test modes on all OBDII compliant vehicles for a complete diagnosis. the KONNWEI KW310 is truly the ultimate in power and affordability, allowing users to do their jobs faster.
8. Displays monitor and I/M readiness status (emissions)
9. Reads live PCM datastream
10. Displays live O2 sensor test data
11. EVAP System test data
12. Live sensor data in text mode and graph mode (1996 and newer vehicles)
13. Reads, stores and playbacks live sensor data
14. Troubleshooter code tips guide technicians to the root cause of a trouble code faster, saving diagnosis and repair time
15. Battery Voltage real time monitoring,better than other expensive item from others brand.
16. Built-in DTC look-up library and display definition.
17. Retrieves vehicle information (VIN, CIN...
Features: KW206 OBDII Code reader Function and Features :
1. Works on ALL OBD II Enabled vehicles, both Gasoline and Diesel cars - domestic and imported.
2. Features the unique patented One-Click Readiness Key for quick State Emissions readiness check and drive cycle verification.
3. Bright color coded LEDS indicators and built-in speaker provide both visual and audible tone for readiness verification
4. Retrieves generic (P0, P2, P3 and U0), manufacturer specific (P1, P3 and U1) codes and pending codes
5. Easily determines the cause of the Check Engine Light(MIL)
6. Turns off Check Engine Light (MIL), clears codes and resets monitors
7. Enhanced OBD2 Mode 6 On Board Monitoring Test Results for Specific Monitored Systems.
8. Views freeze frame dataThe KONNWEI KW206 OBD2 / EOBD / CAN Car Diagnostic Scannersupports all 10 OBDII test modes on all OBDII compliant vehicles for ...
Features: 7. Views freeze frame dataThe KONNWEI KW310 OBD2 / EOBD / CAN Car Diagnostic Scanner supports all 10 OBDII test modes on all OBDII compliant vehicles for a complete diagnosis. the KONNWEI KW310 is truly the ultimate in power and affordability, allowing users to do their jobs faster.
8. Displays monitor and I/M readiness status (emissions)
9. Reads live PCM datastream
10. Displays live O2 sensor test data
11. EVAP System test data
12. Live sensor data in text mode and graph mode (1996 and newer vehicles)
13. Reads, stores and playbacks live sensor data
14. Troubleshooter code tips guide technicians to the root cause of a trouble code faster, saving diagnosis and repair time
15. Battery Voltage real time monitoring,better than other expensive item from others brand.
16. Built-in DTC look-up library and display definition.
17. Retrieves vehicle information (VIN, CIN...
Features: Function :
System voltage 12 Volts and Voltage test in waveform
Test Result Good, Recharge or Replace
Capacity Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating. Internal resistance value (mO) and Life in percentage (%)
Cranking system and Charging system
Record and re-play battery data, Life-time free update service
Battery test, cranking test, charging test and other additional functions.
The major battery standards CA,CCA,BCL,MCA,JIS,SAE,EN,GB,DIN and IEC are supported.
Feature :
Measure Standard ,CCA 100-2000 ,BCI 100-2000 ,CA 100-2000 ,MCA 100-2000,
JIS 26A17-24SH52 ,DIN 100-1400 ,IEC 100-1400 ,EN 100-2000 ,SAE 100-2000,
GB 100-1400,System Voltage 12 Volts ,Input Voltage Range 8V-16V ,Power Requirements are no internal batteries required,Power on when hooked up during testing.
Features: KW650 Battery Load Tester Key Features
1. Strong Capacity: Works on 6V&12V batteries, battery ratings from 100 - 2200 CCA, also starter and alternator;
2. Test Multiple Battery Types: regular flooded, AGM flat plate, AGM spiral and gel;
3. Color screen, support both in-vehicle and out-of-vehicle test, no need to remove the battery;
4. Test Standards: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE and GB;
5. Test result: SOH, SOC, CCA value, CCA rating, voltage, internal resistance, etc;
6. Provide reliable results within seconds, display suggestion according to the testing results (Good, Recharge, Replace), detects bad cells directly;
7. Polarity reverses connection protection; reminder light
8. Support 12 languages: English, Russian, French, Spanish, German, Italian, Portuguese, Dutch, etc.
9. Print data & Lifetime free update service;
10. Suitable for automobile fac...