DIY Cooling

• Block Compatibility: M.2 2280 SSD
• Block Material: Aluminum
• Radiator Material: Aluminum
• Parts: 1 Year
• Model #: 2 x HS 70x22x3

Limited time offer, ends 01/30

• Model #: 11-001-373

Limited time offer, ends 01/30

• Model #: 11-001-356

Limited time offer, ends 01/30

• Model #: 11-001-361

Limited time offer, ends 01/30

• Model #: 11-001-358

Limited time offer, ends 01/30

• Model #: 11-001-360

Limited time offer, ends 01/30

• Model #: 11-001-359

• Type: Heatsink
• Block Compatibility: 2280 M.2 SSD
• Block Material: Aluminum
• Radiator Size: 22x70x6mm
• Model #: HS22x70x6

Limited time offer, ends 01/30

• Model #: 11-001-354

• Block Compatibility: M.2 SSD
• Block Material: Aluminum
• Radiator Size: 22x70x3mm
• Radiator Material: Aluminum
• Model #: HS-22x70x3

Limited time offer, ends 01/30

• Model #: 11-001-349

Limited time offer, ends 01/30

• Model #: 11-001-362-8CM

Limited time offer, ends 01/30

• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
• Model #: 11-001-098

Limited time offer, ends 01/30

• Model #: 11-001-362-12CM

Limited time offer, ends 01/30

• Model #: 11-001-362-9CM

Limited time offer, ends 01/30

• Model #: 11-001-024

Limited time offer, ends 01/30

• Model #: 11-001-061

Limited time offer, ends 01/30

• Model #: 11-001-195

Limited time offer, ends 01/30

• Model #: ZB40200

Limited time offer, ends 01/30

• Model #: 11-001-127

Limited time offer, ends 01/30

• Model #: 11-001-289

Limited time offer, ends 01/30

• Model #: 11-001-100

Limited time offer, ends 01/30

• Model #: 11-001-362-6CM

Limited time offer, ends 01/30

• Model #: 11-001-362-14CM

Limited time offer, ends 01/30

• Model #: 11-001-362-5CM

Limited time offer, ends 01/30

• Model #: 11-001-355

Limited time offer, ends 01/30

• Model #: 11-001-362-4CM

Limited time offer, ends 01/30

• Color: silver
• Compatibility: CPU
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Tested to fit the Raspberry Pi CPU / SoC; Reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and grease. -Peel the protective liner off on the base of the heatsink. -Apply the heatsi...
• Model #: 11-001-255(10)

Limited time offer, ends 01/30

• Model #: 11-001-357

Limited time offer, ends 01/30

• Compatibility: CPU
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Tested to fit the Raspberry Pi CPU / SoC; Reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and grease. -Peel the protective liner off on the base of the heatsink. -Apply the heatsinks to the corresponding ...
• Model #: 11-001-255(2)

Limited time offer, ends 01/30

• Color: silver
• Compatibility: CPU
• Features: Lightweight 4 pieces/setof aluminum heat sinks with adhesive backing strip to stick firm With thermal transfer peel-and-stick tape,that allow for easy installation on to your board. Help keep your Pi cool while overclocking These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and grease. -Peel the protective liner off on the base of the heatsink. -Apply the heatsinks to the corresponding chip modules and apply firm pressure. One Set ...
• Model #: 11-001-254(10)

Limited time offer, ends 01/30

• Color: Silver
• Compatibility: CPU
• Features: Lightweight 4 pieces/setof aluminum heat sinks with adhesive backing strip to stick firm With thermal transfer peel-and-stick tape,that allow for easy installation on to your board. Help keep your Pi cool while overclocking These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and grease. -Peel the protective liner off on the base of the heatsink. -Apply the heatsinks to the corresponding chip modules and apply firm pressure. One Set ...
• Model #: 11-001-254(2)

Limited time offer, ends 01/30

• Model #: 11-001-012

Limited time offer, ends 01/30

• Model #: 11-001-351

Limited time offer, ends 01/30

• Model #: 11-001-350

Limited time offer, ends 01/30

• Compatibility: Motherboard Chipsets
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc
• Dimensions: 100mm x 150mm x 0.8mm
• Model #: 11-001-023