Specification: Connections: USB C output
Transducer Type: Permanently polarized condenser capsule
Polar Pattern: Cardioid
Sample Rate: 96 kHz
Bit Depth: 24 bit
Maximum SPL: 122 dB SPL
Specification: Connections: USB C output
Transducer Type: Permanently polarized condenser capsule
Polar Pattern: Cardioid
Sample Rate: 96 kHz
Bit Depth: 24 bit
Maximum SPL: 122 dB SPL
Specification: ELEMENT: Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN: Cardioid
FREQUENCY RESPONSE: 20-20,000 Hz
OPEN CIRCUIT SENSITIVITY: -37 dB (14.1 mV) re 1V at 1 Pa
IMPEDANCE: 100 ohms
MAXIMUM INPUT SOUND LEVEL: 144 dB SPL, 1 kHz at 1% T.H.D.
NOISE: 20 dB SPL
DYNAMIC RANGE (typical): 124 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO: 74 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS: 48V DC, 2 mA typical
OUTPUT CONNECTOR: Integral 3-pin XLRM-type
Dimension: 6.38" (Long) x 2.05" (maximum body diameter)
Specification: Output Impedance: <=100 ohms
Load impedance: >=1000 ohms
Equivalent Noise level: <=20dBA(IEC 581-5
Signal Noise Ratio: 78dB
Electrical current: 3mA
Microphone output interface: 3.5mm
Use of voltage: 48V phantom power supply
Wire: 3.5mm inserted audio interface, 8-1/5 ft long
Microphone body weight: 0.77 lbs
Size: 1-4/5" Dia x 6" L
Microphone Material: Steel net + Zinc alloy hand holding part
Color: