Specifications: Weight Capacity: individual LCD weight = 7 to 20 lbs (3.2 to 9.1 kg)
Screen = 24"
Lift: 13"
Tilt: 75°
Pan: 360°
Rotation: 360°
Vesa: MIS-D
Includes two (2) LCD arms and extensions, pole, desk clamp
Can be configured to hold a laptop instead of an LCD display; also order the Notebook Tray accessory (50-193-200)
Quality Tested: 10,000-cycle test applied to lift mechanism, ensuring years of trouble-free height adjustment
Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
Desk clamp attaches to edge up to 2.6" (66 mm) thick
A separately ordered grommet mount accessory (98-035) is available to attach the arm through a hole in the desktop
This product is certified in compliance with indoor air quality standards defined by ANSI/BIFMA pertaining to emissi...
Scanning Speed: Maximum Mono Scan Speed: Up to 45 ppm
Maximum Color Scan Speed: Up to 45 ppm
Maximum Mono Scan Speed: Up to 90 ipm
\Maximum Color Scan Speed: Up to 90 ipm
Specifications: Includes height-adjustment column, desk clamp, crossbar, two (2) LCD pivots, worksurface, large keyboard tray
NOTE: Extra-long cables may be required to span between standing and sitting heights
Worksurface Dimensions: 0.25"H x 23"W x 15"D (6 x 585 x 380 mm)
Keyboard Tray Dimensions: 0.25"H x 27"W x 9"D (6 x 685 x 226 mm)
Weight Capacity: Maximum total load on height-adjustment assembly = 25 lbs (11.4 kg). LCD weight = 6-12 lbs (2.7-5.5 kg) each, worksurface = 5 lbs (2.3 kg), keyboard tray = 5 lbs (2.3 kg). For proper operation the total weight of components when added together should not exceed 25 lbs (11.4 kg)
Lift Range: LCD and keyboard adjust 18" (46 cm) in tandem; LCD adjusts 4.8" (12.2 cm) independently; maximum LCD height adjustment = 22.8" (58 cm). The wor...
Specifications: LCD Size: <=24"
Capacity: 8-33 lbs
Mounting Standards: VESA FDMI MIS-D, 100/75 (hole pattern: 100 x 100 mm & 75 x 75 mm)
Monitor pans left/right up to 50° (varies per size of monitor)
Fold-down keyboard with built-in mouse pad surface
Keyboard tray extends out up to 5" (12.7 cm) inches when in use
Keyboard tray pans left/right up to 120°
Scanner and mouse holder integrated into the keyboard tray
Back-tilt keyboard tray adjustable (0 to -10 degrees)
Integrated cable management system can be configured on either side
Easy-to-clean exterior
Specifications: Includes height-adjustment column, desk clamp, LCD pivot, worksurface/keyboard, one (1) USB extension cable, one (1) cable wrap
NOTE: Extra-long cables are required to span between standing and sitting heights
Optimized for desks that are 30"-36" deep (76-91 cm): on desks shorter than 30", worksurface will extend beyond desktop edge; on desks deeper than 36", worksurface will not extend to desktop edge
Worksurface Dimensions: 29.5" x 21.8" (75 x 55.4 cm)
Weight Capacity: Maximum total load on height-adjustment assembly = 16 lbs (7.3 kg). LCD weight = 3-13 lbs (1.3-5.9 kg); worksurface = 5 lbs (2.3 kg)
LCD and keyboard adjust 18" (46 cm) in tandem; LCD adjusts 5" (13 cm) independently; maximum LCD height adjustment = 23" (58 cm)
Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 ...
Specifications: Description: Worksurface for WorkFit-S Sit-Stand Workstations (black)
Includes worksurface, mounting brackets with integrated handle, and mounting hardware
Worksurface Dimensions: 0.25" H x 23" W x 15 "D (6 x 585 x 380 mm)
Cannot be added to system where Tablet/Document Holder accessory 97-558-200 is installed
Installation of the worksurface will not impact normal 20" (51 cm) range of sit-stand height adjustment, but may impact the relative vertical adjustment of larger displays when in portrait orientation
When this accessory is added to the WorkFit-S, total weight capacity of the workstation is reduced by 6 lbs (2.7 kg)
Specifications: Includes fully assembled dual arm, two-piece desk clamp, mounting hardware
Can be configured to hold a laptop instead of an LCD display; also order the accessory Notebook Tray (50-193-200)
Quality Tested: 10,000-cycle test applied to lift mechanism, ensuring years of trouble-free height adjustment
Arm folds back over the base into a compact retracted position; perfect for tucking under systems furniture storage shelves or cabinets in space constrained areas
Mounting Options: Desk Clamp attaches to surface edge .47" to 1.25" (12 to 32 mm) thick
An accessory Grommet Mount is available to install arm to desk via a through-hole in its surface: order 98-111
Desk clamp has anti-rotation screws to prevent base from slipping
Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm &...