Specifications: Internal Dimensions: 2.5"H x 12"W x 10.5"D (63.5 x 305 x 267 mm)-includes dividers to configure up to 16 compartments
The primary drawer must be the first drawer attached to the cart as it contains the drawer controller. The supplemental drawer attaches to the underside of the primary drawer
Compatible only with SV43/44 series carts
Drawer features electronic and key-lock access
Purchase travel-stop accessory separately based on the number of drawer rows on cart: pt # 97-873 for 3 rows; pt # 97-874 for 4 or 5 rows
Shipping Dimensions: 18" x 18" x 6.5" (457 x 457 x 165 mm)
Sizes/Dimensions: 38.10" x 24.60" x 21.30"
88 lbs.
Specifications: Device Capacity: 30
Slot Size: 10.20" x 0.95" x 14.74"
Supported Devices: Laptop / Chromebook / Tablets
Charging Type: Simultaneous Charging
Divider Type: Metal bar with rubber coating
Includes casters and handlebar
Power Specification: (AC IN) 100-120V - 50/60Hz, 15A max
Power Strip: (31 power outlets) 100-120V - 50/60Hz, 15A max
Security: (Front and rear doors) 3-point locking, doors with keys included
Casters: Four 4.00" casters (two are lockable)
Specifications: DESCRIPTION: Simple, Fast Stand Up Conversion for Laptops & Desktops.
# Height Settings: 4 Heights (3, 6, 10, 14")
Top Panel Dimensions: 27.5x19.5"
Min Height: 3"
How Does It Adjust?: Single Locking Lever w/ Spring-Assisted Height Adjustment
Max Height: 14"
Material: Steel & Premium MDF
Product Weight: 21 lbs
Features: 4 Non-Skid & Non-Scratch Feet
Specifications: Internal Dimensions: 2.5"H x 12"W x 10.5"D (63.5 x 305 x 267 mm)-includes dividers to configure up to 16 compartments
The primary drawer must be the first drawer attached to the cart
Drawer features key-lock access
This drawer is manually operated. It does not interface with a cart’s electrical or auto-locking drawer systems
Shipping Dimensions: 18" x 18" x 9.5" (457 x 457 x 242 mm)
Shipping Weight: 12 lbs (5.4 kg)
Type Specifications: Cable Management Maneuverable Locking Door LED Charge Indicator Power Strip Locking Mechanism Locking Casters Adjustable Divider Power Management
Sizes/Dimensions: 28.75" x 25.00" x 41.50"
Weight: 196 lbs.
Specifications: Includes top shelf, handle, locking door latch w/ padlock bracket and two-point lock mechanism, cord wrap, 12' (3.5 m) power cord, adjustable device bays, cord pass-through slots, cable channels, adjustable-height shelves, 4" casters (2 directional-lock and 2 total-lock), external power receptacles, locking IT area, internal power receptacles
Total Capacity: Up to 36 devices with 1.25"-wide (3 cm) bays; up to 30 devices with 1.6"-wide (4 cm) bays. Adjustable bay dividers install at any width in 1/3" (.8 cm) increments along each shelf’s installation track, supporting devices of any thickness
Before charging, it is recommended that devices be powered off
Maximum Device Width x Height = 14.25" x 10" (36.2 x 25.4 cm), including ...
Specifications: Includes worksurface, cable/brick storage compartment, storage hook, 3" (75 mm) casters (2 locking), tablet riser with tilting tablet mount assembly, scanner holder
Choose the level of security that is right for your tablet. This cart ships with three options: Hard-mount your tablet case directly to the VESA mount at the top of the riser if case includes VESA hole pattern; or add the easel bracket to the VESA mount and place your tablet on its surface; add the top grip to the easel bracket to clamp the tablet for extra stability when moving the cart. VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
Tablet can be installed in either landscape or portrait mode
When installing tablet using easel bracket, tablet must fit within these dimensions: maximum outside width = 12.25" (...