Specifications: Compatibility: Pop series and compatible Fractal Design cases
Material: Steel
Item Dimensions (LxWxH): 166 x 95 x 8 mm
Item Weight: 0.09 kg
Package Contents:
1 x SSD bracket - Type D
8 x M3 screws for 2.5" SSD/HDD
1 x captive thumbscrew
Features: 3 AC Outlets and 3 USB Ports(1 USB-A and 2 USB-C)
High-Speed Charging
Extra Long 10 ft Extension Cord(1.65ft/5ft/10ft/15ft/25ft multi-cord)
Advanced Safety Features
Flame-Retardant Casing
Anti-Slip Rubber Pads
Specifications: Includes 1 x Combined 7+15 pin SATA plus LP4 Power to SATA Cable
Connectors 1x SATA 7 pin Female Connector
Connectors 1x SATA 15 pin Female Connector
Connectors 1x LP4 Male Connector
Specifications: Description: Vertical Small CPU Holder (black)
Includes CPU holder, bumpers
CPU Size Range: 1-3/8" to 3-3/4" (35 to 95 mm) wide; accommodates most small form factor and ultra small form factor CPUs
Weight Capacity: 50.00 lbs.
Mounting Options: Mounts to sturdy vertical surfaces. Where applicable, attach to wood stud. To increase support, a Wall Track accessory (ordered separately) is recommended
Specifications: Pro3000 Analog Toner Specifications
User interface:
Slide switch selects Continuity or Tone Mode
Push button switch selects SOLID, ALT or OFF
Tone mode LED
Continuity/Polarity LED
Solid Frequency:
1000 Hz nominal
Alternating Frequency:
1000/1500 Hz nominal
Over Voltage Protection:
60 Vdc in Toner/Polarity Mode
Output Power in Tone Mode:
8 dbm into 600 ohms
Output Voltage Level in Continuity Mode:
8 Vdc with fresh battery
Battery:
9V alkaline
Temperature:
Operating: -20° C to 60° C, Storage: -40° C to 70° C
Case dimensions:
2.7 in. x 2.4 in. x 1.4 in. (6.9 cm x 6.1 cm x 3.6 cm)
The Pro3000’s ergonomic sleek design is easy to handle and use. The large speaker on the probe makes the tone easier to hear through walls, enclosures, wood or plaster. A recessed on/off button helps prevent the probe from accidentally bei...
Specifications: Weight Capacity: 50 lbs (22.7 kg)
Maximum CPU Dimensions: 18" x 8.5" (457 x 216 mm)
Minimum CPU Dimensions: 9.4" x 2.6" (239 x 66 mm)
Mounting Options: Directly to wall; under desk; to Ergotron Wall Track (interface bracket required, 97-091); to Ergotron Command Post (interface bracket required, 60-366); to 2" round pole (interface bracket required, 60-131-003); on Ergotron Mobile WorkStand Cart (interface bracket required, 60-131-003); on Ergotron LX Large Display Cart or Neo-Flex Mobile MediaCenter; on Neo-Flex Laptop and LCD Carts; on StyleView SV40/41/SV42 EMR Carts and StyleView SV32 PHD Carts
Specifications: Compatibility: Pop series and compatible Fractal Design cases
Material: Steel
Item Dimensions (LxWxH): 157 x 117 x 30 mm
Item Weight: 0.04 kg
Package Contents:
1 x HDD tray - Type D
4 x HDD dampeners
4 x 6-32 screws for HDD
4 x M3 screws for 2.5" SSD/HDD
1 x captive thumbscrew
Specifications: Cable Manager: Cable Management Kit (grey).
Includes:
one (1) piece of 30" (76 cm) cable wrap, two (2) pieces of 11" (28 cm) cable management channel, two (2) adhesive strips, four (4), mounting screws, and four (4) hollow wall anchors.
Cable Channel Dimensions: 11.25" x 1.75" x 0.75" (286 x 44 x 19 mm)