Specifications: # of Displays Supported: 1
Articulating: No
Cable Management: Yes
Mounting Options: Wall-Mount
VESA Hole Pattern(s): 75x75 mm / 100x100 mm
Display Pan: +180° / -180°
Display Rotation: 360°
Display Tilt: +90° / -15°
Height Adjustment: No
Maximum Arm Extension: 10.2 in [260 mm]
Maximum Display Size: 30in
Minimum Display Size: 13"
Weight Capacity (Per Display): 30.9 lb [14 kg]
Swivel / Pivot:
+180°/-180° at the wall
360° at the elbow
Included in Package:
1 x Wall Mount
1 x Swivel Arm
1 x Monitor Mount
1 x M3 Hex Key
4 x Thumb Screws
2 x Wall Plugs
2 x Mounting Screws
1 x User Manual
Specifications: # of Displays Supported: 2
Articulating: Yes
Cable Management: Yes
Mounting Options: Desk & Grommet Clamp
Mounting Surface Thickness:
Desk Clamp: Table Thickness 0.78 - 2.36 in. (20 - 60 mm)
Grommet Clamp: Table Thickness 0.78 - 2.36 in. (20 - 60 mm)
Grommet Mount Hole Size: 0.39 - 2.36 in. (10 - 60 mm)
VESA Hole Pattern(s): 75x75 mm / 100x100 mm
Display Pan: +180° / -180°
Display Rotation: 360°
Display Tilt: +90° / -15°
Maximum Arm Extension: 16.5 in [420 mm]
Maximum Arm Span: 37 in [940 mm]
Maximum Display Size: 27in
Minimum Display Size: 13"
Weight Capacity (Per Display): 22.1 lb [10 kg]
Included in Package:
4 x Swivel Arms
2 x VESA Monitor Mounts
1 x Shoulder
1 x Desk Clamp and Pole Assembly
2 x M3 Hex Keys
1 x EVA Cushion
8 x Thumbscrews
1 x Cable-Management Clip
1 x User Manual...
Specifications: Screen: <= 34.00"
Lift: 13.00" (33.00 cm)
Tilt Range: 70 degrees backward, 5 degrees forward
Pan: 360 degress
Rotation: 360 degrees
VESA: MIS-D
Mounting Options: Desk Clamp attaches to surface edge 0.40" to 2.40" (10.00 to 60.00 mm) thick; Grommet Mount attaches through surface holes 0.31" to 2.00" (8.00 to 50.00 mm) wide and up to 2.25" (57.00 mm) thick
Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100.00 x 100.00 mm & 75.00 x 75.00 mm)
Weight Capacity: 7.00 to 25.00 lbs. (3.20 to 11.30 kg). With monitors greater than 20.00 lbs. (9.10 kg) in weight, the vertical range of motion may be reduced up to 4.50" (11.00 cm) for a total height range of 8.50" (22.00 cm)
Note: If installed on WorkFit-T or WorkFit-TL, maximum allowable monitor weight is reduced to 14.00 l...
Specifications: # of displays supported: 2
Mounting Options: Desk Clamp
One-touch height adjustment: Yes
VESA Hole Pattern(s):
75x75 mm
100x100 mm
Display Rotation: 360°
Height Adjustment: Yes
Maximum Arm Extension: 22.3 in [567.5 mm]
Maximum Arm Span: 44.7 in [1135 mm]
Maximum Display Size: 30in
Mounting Surface Thickness: 90 mm (3.54 in.)
Pan: 180°
Swivel / Pivot:
135° around the support post
360° at the elbow
Tilt: +90° / -65°
Weight Capacity: 17.7 lb [8 kg]
Specifications: Mounting Surface Thickness:
Desk Clamp: Table Thickness 0.78 - 2.36 in. (20 - 60 mm)
Grommet Clamp: Table Thickness 0.78 - 2.36 in. (20 - 60 mm)
Grommet Mount Hole Size: 0.39 - 2.36 in. (10 - 60 mm)
VESA Hole Pattern(s): 75x75 mm / 100x100 mm
Display Pan: +180° / -180°
Display Rotation: 360°
Display Tilt: +90° / -15°
Maximum Display Size: 30in
Weight Capacity (Per Display): 30.9 lb [14 kg]
Included in Package :
1 x Monitor Mount Assembly
1 x Swivel Arm
1 x Pole-and-Clamp Assembly
4 x Surface Protectors
1 x Flange Mount
1 x Torx Key
1 x 3mm Hex Key
1 x 4mm Hex Key
1 x Access Card
2 x Monitor Mount Screws
4 x VESA Screws
1 x User Manual
Specifications: Device Supported: Flat Panel Display
Maximum Load Capacity: 25 lb
Maximum Screen Size Supported: 42"
Color: Polished Aluminum
VESA Mount Standard:
75 x 75
100 x 100
200 x 100
200 x 200
Specifications: Wall Track is a low-cost, zero-footprint mounting system that attaches to most vertical surfaces. It accommodates an entire computer workstation.
Separately-ordered brackets are required to attach components to Wall Track (view + Accessories). The height of components can be adjusted by loosening set-screws on these brackets.
Description: 42" Wall Track (aluminum) with cable management channel covers
Dimensions: 42" x 5" x .87" (1067 x 127 x 22 mm)
OSHPD Pre-approval Number OPA-0620
Fasteners for attaching to wall not included. Fasteners may be purchased from Ergotron: part number 97-531 for metal or wood studs; part number 90-011 for hollow walls
Separately-order brackets required to attach Ergotron components: part number 97-091 for LX & MX Arms, Neo-Flex Wall Mounts, 400, 200 and 100 Series Arms and Pivot...
Specifications: OSHPD Pre-approval Number OPA-0620
Fasteners for attaching to wall not included. Fasteners may be purchased from Ergotron: part number 97-531 for metal or wood studs; part number 90-011 for hollow walls
Separately-order brackets required to attach Ergotron components: part number 97-091 for LX & MX Arms, Neo-Flex Wall Mounts, 400, 200 and 100 Series Arms and Pivots, and Universal CPU Holder; part number 60-156 for Medium and Small CPU Holders
Dimensions: 26" x 5" x .87" (660 x 127 x 22 mm)
Shipping Weight: 4 lbs (1.8 kg)
Specifications: Description: Steel Stud Wall Mounting Kit
Includes Wall Plate, six (6) screws, six (6) anchors
Screw size = 1/4-20 x 1-1/2"
Compatible Ergotron Mounts: Neo-Flex HD Wall Mounts, LX Wall Mount Arms, 100 Series Pivots, 200 Series Wall Mounts, 400 Series Wall Mount Arms
Weight Capacity: 50 lbs (22.7 kg)
UL compliant: Tested to four times its maximum weight capacity per UL 1678 Specification (do not exceed 50 lbs/22.7 kg in actual use)
Specifications: Includes fully assembled arm, wall mount base, mounting hardware
Can be configured to hold a laptop instead of an LCD display; also order the accessory Notebook Tray (50-193-200)
Quality Tested: 10,000-cycle test applied to lift mechanism, ensuring years of trouble-free height adjustment
Arm folds back over the base into a compact retracted position—space between wall and VESA plate is just 4.4" (11 cm) when fully retracted
Mounting Options: Attaches directly to sturdy vertical surfaces. Where applicable, install to wood stud. Also attaches to Wall Track using bracket 97-091 (order separately)
Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
Tilt Range: 90° backward, 90° forward
Pan Range: 180° at base; 360° between extension and arm
Extension Range: 2...