DIY Cooling

• Part Number: PH-C370I_BK01
• Type: CPU Block
• Block Compatibility: Intel LGA 1700 (Support Intel 14th Gen)/1200/115x
• Block Dim.: 3.7 in x 3.7 in x 1.23 in (94 mm x 94 mm x 31.15 mm)
• Model #: PH-C370I_BK01

• Type: Combo Reservoir
• Specification: Pump Compatibility: DDC Installation Compatibility: 120 or 140 mm fan/radiator Seal O-Ring: DuPont VITON Reservoir - ID: 88.62 / W: 1.78 Color: Transparent RGB LED type: Digital-RGB (addressable) LED Number: 5050, 12pcs LED Electricity Spec: 5V/0.45A/2.25W Capacity: 160ml Materials: Acrylic body, Acrylic backplate, Steel bracket Max Water Loop Temperature: 60? Fill port: 1 x G 1/4 No. of inlet: 3 x G 1/4 No. of outlet: 1 x G 1/4
• Package Contents: 1 x PH-R160C_02 3 x Stop Fitting G1/4 (Pre-installed) 1 x D-RGB LED Board (12 Pcs LEDs) 1 x D-RGB LED cable 1 x D-RGB LED motherboard adapter 1 x Reservoir Bracket (2x Pre-installed Rubber Pad) 2 x M4x10mm bracket screws 2 x M4x6mm LED strip screws 4 x M4 x25mm pump screws 4 x fan screws 1 x 3 mm Allen key 1 x User Manual
• Model #: PH-R160C_02

• Type: Hard tube
• Tube Dim.: 2x 90 cm
• Tube Material: HI-PMMA
• Package Contents: PH-GEF_HT16_FR 2x
• Model #: PH-GEF_HT16_FR

• Type: Case Fan
• Bearing Type: 2 Ball
• RPM: 2050 RPM
• Air Flow: 27 CFM
• Model #: SF8025L

• Type: Complete DIY Water-Cooling Kit
• Block Compatibility: Intel: LGA 1700 AMD: AM4 /AM5
• Block Dim.: 72 x 64 x 25.7mm (2.83 x 2.52 x 1in)
• Radiator Size: 360mm
• Model #: PH-GEF_CPU450_DBK

Limited time offer, ends 01/30

• Model #: 11-001-362-8CM

• Type: Shift-XT Hi-Res Display
• Color: Black
• Specification: Connection Type: HDMI, USB Power Display Size: 5.5" Resolution: 2160x1440 Color Spectrum: sRGB99% Housing Color: Black Refresh Rate: 60hz
• Package Contents: Phanteks Shift-XT Hi-Res Display
• Model #: PH-ES120XT_LCD_BK01

Limited time offer, ends 01/30

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc Package included: 10 pcs Thermal Conductive Copper Shims 15mm x 15mm x 1.2mm
• Dimensions: 15mm x 15mm x 1.2mm
• Model #: 11-001-204

Limited time offer, ends 01/30

• Model #: 11-001-362-12CM

Limited time offer, ends 01/30

• Model #: 11-001-362-9CM

Limited time offer, ends 01/30

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Anodized Black Aluminum heatsink for Computer General CPU, GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 25mm x 25mm x 10mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H) Weight: 30g Package Content: 5pcs x Heatsink
• Dimensions: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H)
• Model #: 11-001-328

Limited time offer, ends 01/30

• Model #: 11-001-235

• Type: Soft tube
• Tube Dim.: 3 meter
• Tube Material: PVC
• Package Contents: PH-GEF_ST16_CL 1x
• Model #: PH-GEF_ST16_CL

• Type: Combo Reservoir
• Specification: Pump Compatibility: D5 Pump (Gen3 D5 Pump pre-installed) Installation Compatibility: 120/140 mm fan/radiator Color: White LED Type: Digital-RGB LED strip hard board (+5V, data, empty, Ground) LED strip length: 74 mm Number of LEDs: 7pcs Input Voltage: +5V Current Max: 0.21A Wattage Max: 1.05W Capacity: 210 ml Materials: Acrylic Aluminum cover Fitting: Nickel Plated Brass Fitting Insert: ABS Fill Port 1 x G 1/4 No. of Inlet 2 x M24 x P1 No. of Outlet 2 x M24 x P1 Supported tube size Hard Tube: OD 16mm Soft Tube: OD 16mm; ID 10mm Tube Compatibility Hard Tube: PETG, Acrylic tube Soft Tube: PVC tube
• Package Contents: PH-GEF_RES140_DWT 1x Fitting Inserts (for soft tube) 3x Mounting bracket 1x Gen3 D5 Pump (Pre-installed) 2x Stop Fitting G1/4 (Pre-installed) 1x Plug Fitting M24 (Pre-...
• Model #: PH-GEF_RES140-D5_DWT

Limited time offer, ends 01/30

• Model #: 11-001-024

Limited time offer, ends 01/30

• Model #: 11-001-025

Limited time offer, ends 01/30

• Model #: 11-001-012

• Part Number: PH-C370I_WT01
• Type: CPU Block
• Block Compatibility: Intel LGA 1700 (Support Intel 14th Gen) /1200/115x
• Block Dim.: 3.7" x 3.7" x 1.23" (94 mm x 94 mm x 31.15 mm)
• Model #: PH-C370I_WT01

• Radiator Size: 410 x 123 x 30mm (16.14 x 4.84 x 1.18in)
• Specification: Tubes: H90 Brass Fins: T2 Copper Water Tank: H62 Brass Thread Insert: H59 Brass Side Panel: 430 Stainless Steel Fitting: ED Black Brass Fitting Insert: ABS Supported tube size Hard Tube: OD 16mm Soft Tube: OD 16mm; ID 10mm Tube Compatibility Hard Tube: PETG, Acrylic tube Soft Tube: PVC tube
• Package Contents: 360RAD-30 Black 1x Push-in Fitting (Pre-installed) 2x Fitting Inserts (for soft tube) 3x M4x5 screws 12x M4x30 screws 12x M4x36 screws 12x Manual 1x
• Model #: PH-GEF_RAD363_BK

• Type: Combo Reservoir
• Specification: Pump Compatibility D5 Pump (Gen3 D5 Pump pre-installed) Installation Compatibility 120/140 mm fan/radiator Color Black LED Type Digital-RGB LED strip hard board (+5V, data, empty, Ground) LED strip length 74 mm Number of LEDs 7pcs Input Voltage +5V Current Max: 0.21A Wattage Max: 1.05W Capacity 210 ml Materials Acrylic Aluminum cover Fitting: ED Black Brass Fitting Insert: ABS Fill Port 1 x G ¼ Stop Fitting Number of Inlet 2 x M24 x P1 Number of Outlet 2 x M24 x P1 Supported tube size Hard Tube: OD 16mm Soft Tube: OD 16mm; ID 10mm Tube Compatibility Hard Tube: PETG, Acrylic tube Soft Tube: PVC tube
• Package Contents: PH-GEF_RES140_DBK 1x Fitting Inserts (for soft tube) 3x Mounting bracket 1x Gen3 D5 Pump (Pre-installed) 2x Stop Fitting G1/4 (Pre-installed) 1x Plug Fitting M24 (...
• Model #: PH-GEF_RES140-D5_DBK

Limited time offer, ends 01/30

• Model #: ZB40200

• Type: Combo Reservoir
• Specification: Pump Compatibility: DDC Installation Compatibility: 120/140 mm fan/radiator Seal O-Ring: DuPont VITON Reservoir - ID: 126.72 /W: 1.78 (AS049) Color: Transparent RGB LED type: Digital-RGB (addressable) LED Number: 5050, 18pcs LED Electricity Spec: 5V/ 0.7A/ 3.5W Capacity: 200ml Materials: Acrylic body, Acrylic backplate, Steel bracket Max Water Loop Temperature: 60 degree C Fill Port: 1 x G 1/4 No. of Inlet: 3 x G 1/4 No. of Outlet: 1 x G 1/4
• Package Contents: 1 x PH-R220C_02 3 x Stop Fitting G1/4 (Pre-installed) 1 x D-RGB LED Board (18 Pcs LEDs) 1 x D-RGB LED cable 1 x D-RGB LED motherboard adapter 1 x Reservoir Bracket (2x Pre-installed Rubber Pad) 2 x M4x10mm bracket screws 2 x M4x6mm LED strip screws 4 x M4 x25mm pump screws 4 x fan screws 1 x 3 mm Allen key 1 x User Manual
• Model #: PH-R220C_02

• Type: Office Products
• Color: Black
• Specifications: Ports: 32 Side A - Connector: 32 x KEYSTONE JACK CUTOUT Side B - Connector: 32 x KEYSTONE JACK CUTOUT Certifications: RoHS
• Package Content: N062-032-KJ 32-Port 2U Rack-Mount Unshielded Blank Keystone/Multimedia Patch Panel Grounding wire
• Model #: N062-032-KJ

Limited time offer, ends 01/30

• Model #: 11-001-373

Limited time offer, ends 01/30

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Anodized Black Aluminum fin heatsink cooling , generally used in heat treatment and the cooling IC and electronic component, for example: RAM, CPU Memory , GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,1W LED etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 28mm x 28mm x 11mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 28 x 28 x 11mm/1.10" x 1.10"x 0.43"(L*W*H) Weight: 5...
• Model #: 11-001-329

Limited time offer, ends 01/30

• Model #: 11-001-362-6CM

Limited time offer, ends 01/30

• Model #: 11-001-362-4CM

Limited time offer, ends 01/30

• Model #: 11-001-362-5CM

Limited time offer, ends 01/30

• Model #: 11-001-362-14CM

Limited time offer, ends 01/30

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for computer PC chipset, power IC, power electric device, LED light devices, etc.Use heatsink adhesive glue to install heatsink .(Glue is not included)Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name : Heatsink; Material : Aluminium Color : Silver Tone Overall Size : 160 x 80x 26.9mm/ 6.3" x 3.15" x 1.09" (L*W*H) Weight : 410g Package Content : 1 x Heatsink
• Dimensions: 160 x 80x 26.9mm/ 6.3" x 3.15" x 1.09" (L*W*H)
• Model #: 11-001-331

Limited time offer, ends 01/30

• Model #: 11-001-351

Limited time offer, ends 01/30

• Model #: 11-001-294

Limited time offer, ends 01/30

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: It is designed for LED lighting lamps and lanterns, LED the cylinder light, such as heat dissipation design and production test. Aluminum extrusion heatsink structure, Strong heat conductivity and heat dissipation Fit for about 8pcs x 3W / 20pcs x 1W LEDs module( emitter),totoal upto 24 Watt Better cooling for LED light if adding a fan , and will cool more leds; Specification Product Name : Heatsink;Material : Aluminium Color : Silver Tone Size (L x W x H): Approx. 11.8 x 5.5 x 0.79 inch / 300 x 140 x 20mm Package Content : 1 x Heatsink
• Dimensions: 300 x 140 x 20mm
• Model #: 11-001-290

Limited time offer, ends 01/30

• Compatibility: Motherboard Chipsets
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc
• Dimensions: 100mm x 150mm x 0.8mm
• Model #: 11-001-023

Limited time offer, ends 01/30

• Model #: 11-001-193

Limited time offer, ends 01/30

• Color: Silver
• Compatibility: CPU
• Features: Lightweight 4 pieces/setof aluminum heat sinks with adhesive backing strip to stick firm With thermal transfer peel-and-stick tape,that allow for easy installation on to your board. Help keep your Pi cool while overclocking These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and grease. -Peel the protective liner off on the base of the heatsink. -Apply the heatsinks to the corresponding chip modules and apply firm pressure. One Set ...
• Model #: 11-001-254(2)