DIY Cooling

Limited time offer, ends 01/30

• Model #: 11-001-015

Limited time offer, ends 01/30

• Model #: 11-001-016

Limited time offer, ends 01/30

• Model #: 11-001-014

Limited time offer, ends 01/30

• Model #: 11-001-013

• Type: Heatsink
• Block Compatibility: 2280 M.2 SSD
• Block Material: Aluminum
• Radiator Size: 22x70x6mm
• Model #: HS22x70x6

• Block Compatibility: M.2 2280 SSD
• Block Material: Aluminum
• Radiator Material: Aluminum
• Parts: 1 Year
• Model #: 2 x HS 70x22x3

• Block Material: Aluminum
• Radiator Size: 22x70x1mm
• Radiator Material: Aluminum
• Model #: Laptop M.2 Heatsink

• Color: Black
• Model #: PS5-HS-Black

• Type: Hi-Res Display
• Color: White
• Specification: Connection Type: HDMI, USB Power Display Size: 5.5" IPS Display Resolution: 2160x1440 Color Spectrum: sRGB99% Housing Color: White Refresh Rate: 60hz
• Package Contents: Phanteks 5.5" Hi-Res Display 4x Fan Screws 4x M4 Screws 1x SATA to Micro USB Type B Cable 1x HDMI Cable 2x Feet
• Model #: PH-HRLCD_WT01

• Block Compatibility: M.2 SSD
• Block Material: Aluminum
• Radiator Size: 22x70x3mm
• Radiator Material: Aluminum
• Model #: HS-22x70x3

• Type: Combo Reservoir
• Specification: Pump Compatibility: DDC Installation Compatibility: 120 or 140 mm fan/radiator Seal O-Ring: DuPont VITON Reservoir - ID: 88.62 / W: 1.78 Color: Transparent RGB LED type: Digital-RGB (addressable) LED Number: 5050, 12pcs LED Electricity Spec: 5V/0.45A/2.25W Capacity: 160ml Materials: Acrylic body, Acrylic backplate, Steel bracket Max Water Loop Temperature: 60? Fill port: 1 x G 1/4 No. of inlet: 3 x G 1/4 No. of outlet: 1 x G 1/4
• Package Contents: 1 x PH-R160C_02 3 x Stop Fitting G1/4 (Pre-installed) 1 x D-RGB LED Board (12 Pcs LEDs) 1 x D-RGB LED cable 1 x D-RGB LED motherboard adapter 1 x Reservoir Bracket (2x Pre-installed Rubber Pad) 2 x M4x10mm bracket screws 2 x M4x6mm LED strip screws 4 x M4 x25mm pump screws 4 x fan screws 1 x 3 mm Allen key 1 x User Manual
• Model #: PH-R160C_02

• Part Number: PH-C370I_BK01
• Type: CPU Block
• Block Compatibility: Intel LGA 1700 (Support Intel 14th Gen)/1200/115x
• Block Dim.: 3.7 in x 3.7 in x 1.23 in (94 mm x 94 mm x 31.15 mm)
• Model #: PH-C370I_BK01

Limited time offer, ends 01/30

• Model #: 11-001-354

• Block Compatibility: Installation Compatibility: 120 and 140mm fan / radiator, Phanteks pump bracket Pump compatibility: DDC / D5 (Stand-alone)
• Type: Reservoir
• LED Color: RGB
• Reservoir Dim.: 8.70" x 3.20" x 1.50"
• Model #: PH-R220_BK01

(7)

• Sports Team: 1 Piece
• Model #: 1 to 3 ARGB

• Type: Case Fan
• Bearing Type: 2 Ball
• RPM: 2050 RPM
• Air Flow: 27 CFM
• Model #: SF8025L

• Type: Complete DIY Water-Cooling Kit
• Block Compatibility: Intel: LGA 1700 AMD: AM4 /AM5
• Block Dim.: 72 x 64 x 25.7mm (2.83 x 2.52 x 1in)
• Radiator Size: 360mm
• Model #: PH-GEF_CPU450_DBK

Limited time offer, ends 01/30

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Product Description Aluminum IC heatsink for PC Chipset power transistor, FET, IC, power amplifier, Voltage Regulator,Computer VGA Northbridge Southbridge etc. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Use Screw to install the heatsink. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 35mm x 35mm x 10mm Weight: 35g Package Content: 2pcs x Heatsink
• Dimensions: 35mm x 35mm x 10mm
• Model #: 11-001-262

Limited time offer, ends 01/30

• Model #: 11-001-349

Limited time offer, ends 01/30

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. Just peel and stick. Reduce the risk of hardware failure due to overheating. Installation Instructions: Make sure the chip modules are free from dirt and grease. Peel the protective liner off on the base of the heatsink. Apply the heatsinks to the corresponding chip modules and apply firm pressure. Package Includes: 1x 14mmx14mmx7.5mm Aluminum Heatsink for Raspberry pi 2B CPU chipset 1x 8.8mmx8.8mmx5mm Aluminum Heatsink for Raspberry pi 2B LAN chipset
• Dimensions: 1x 14mmx14mmx7.5mm CPU chipset 1x 8.8mmx8.8mmx5mm LAN chipset
• Model #: 11-001-200

Limited time offer, ends 01/30

• Model #: 11-001-362-8CM

Limited time offer, ends 01/30

• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
• Model #: 11-001-098

Limited time offer, ends 01/30

• Model #: 11-001-362-9CM

Limited time offer, ends 01/30

• Model #: 11-001-362-12CM

Limited time offer, ends 01/30

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. Size is 8.8mm x 8.8mm x 5mm,Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 8.8mm x 8.8mm x 5mm Heat-conductive adhesive tape is included Weight: 35g Package Content: 50 x Heatsink...
• Model #: 11-001-046

Limited time offer, ends 01/30

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc Package included: 10 pcs Thermal Conductive Copper Shims 15mm x 15mm x 1.2mm
• Dimensions: 15mm x 15mm x 1.2mm
• Model #: 11-001-204

Limited time offer, ends 01/30

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Anodized Black Aluminum heatsink for Computer General CPU, GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 25mm x 25mm x 10mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H) Weight: 30g Package Content: 5pcs x Heatsink
• Dimensions: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H)
• Model #: 11-001-328

Limited time offer, ends 01/30

• Model #: 11-001-235

• Part Number: PH-GB4090AS_BK01_BP
• Type: VGA Block & Cooler
• Block Dim.: Water Block Dimensions (LxWxH) 11.02 x 5.17 x 1 in (280 x 131.244 x 26 mm)
• Block Material: Aluminum
• Model #: PH-GB4090AS_BK01_BP

• Type: Combo Reservoir
• Specification: Pump Compatibility: D5 Pump (Gen3 D5 Pump pre-installed) Installation Compatibility: 120/140 mm fan/radiator Color: White LED Type: Digital-RGB LED strip hard board (+5V, data, empty, Ground) LED strip length: 74 mm Number of LEDs: 7pcs Input Voltage: +5V Current Max: 0.21A Wattage Max: 1.05W Capacity: 210 ml Materials: Acrylic Aluminum cover Fitting: Nickel Plated Brass Fitting Insert: ABS Fill Port 1 x G 1/4 No. of Inlet 2 x M24 x P1 No. of Outlet 2 x M24 x P1 Supported tube size Hard Tube: OD 16mm Soft Tube: OD 16mm; ID 10mm Tube Compatibility Hard Tube: PETG, Acrylic tube Soft Tube: PVC tube
• Package Contents: PH-GEF_RES140_DWT 1x Fitting Inserts (for soft tube) 3x Mounting bracket 1x Gen3 D5 Pump (Pre-installed) 2x Stop Fitting G1/4 (Pre-installed) 1x Plug Fitting M24 (Pre-...
• Model #: PH-GEF_RES140-D5_DWT

• Type: Hard tube
• Tube Dim.: 2x 90 cm
• Tube Material: HI-PMMA
• Package Contents: PH-GEF_HT16_FR 2x
• Model #: PH-GEF_HT16_FR

Limited time offer, ends 01/30

• Model #: 11-001-024

Limited time offer, ends 01/30

• Model #: 11-001-061

Limited time offer, ends 01/30

• Model #: 11-001-025

Limited time offer, ends 01/30

• Model #: 11-001-012

• Radiator Size: 410 x 123 x 30mm (16.14 x 4.84 x 1.18in)
• Specification: Tubes: H90 Brass Fins: T2 Copper Water Tank: H62 Brass Thread Insert: H59 Brass Side Panel: 430 Stainless Steel Fitting: ED Black Brass Fitting Insert: ABS Supported tube size Hard Tube: OD 16mm Soft Tube: OD 16mm; ID 10mm Tube Compatibility Hard Tube: PETG, Acrylic tube Soft Tube: PVC tube
• Package Contents: 360RAD-30 Black 1x Push-in Fitting (Pre-installed) 2x Fitting Inserts (for soft tube) 3x M4x5 screws 12x M4x30 screws 12x M4x36 screws 12x Manual 1x
• Model #: PH-GEF_RAD363_BK