Holiday Shipping Details & Extended Holiday Returns 
- This RIITOP NVMe to USB Adapter is Designed for those who own Multiple NVMe M.2 SSDs that need to be frequently pluging and unpluging. No mounting screws need, simply insert the NVMe M.2 device and connect USB-C cable, you can start using it as external SSD immediately.
- RIITOP NVMe to USB Docking Station Compatibility: Support most of M.2 PCI-e M key NVMe SSDs, Compatible with Samsung 970 EVO /950Pro/ 960Evo/ XP941/ PM951/ PM961/ SM951/ SM962, WD Black NVMe SSD and so on. Only Support M.2 PCI-e Based M Key NVMe SSD
- NVMe Dock Installation: 1. Insert NVMe SSD into Slot 2. Connect USB Cable to Computer
- Please Note: 1. The Temperature of the entire Operating SSD may exceed 60 ° C. Please do not touch the SSD. 2. It can NOT support "Hot-Plugging". Please don't exchange the SSDs when connecting 3. DO NOT support PCI-e M Key AHCI SSD, SATA based B+M key or B Key SSD, Please check with the picture.
- Package including: 1x M2 NVMe to USB Docking, 1x USB C to USB C Cable, 1x USB C to A Adapter
Please Note:
1. The temperature of the entire operating SSD may exceed 60 ° C. Please do not touch the SSD during operation.
2. It can NOT support "Hot-Plugging". Please don't exchange the SSDs when connecting. USB 3.1 (Gen 2) Type-C Interface The docking Station adopts USB 3.1 (Gen2), Type-C interface which supports high-speed transfer rates of up to 10 Gbps.
Support most of M.2 PCI-e M key NVMe SSDs, such as:
Samsung 970 EVO /950Pro/ 960Evo/ XP941/ PM951/ PM961/ SM951/ SM962,
WD Black NVMe SSD and so on.
Important Notice:
Only Support M.2 PCI-e Based M Key NVMe SSD.
USB 3.1 Gen 2 to PCIe Gen3 x2 Bridge Controller
The JMS583 is a USB 3.1 Gen 2 to PCIe Gen3 x 2 bridge controller between USB host and PCIe storage device.
The USB 3.1 Gen 2 interface offers data transfer speed up to 10Gbps, doubling the USB 3.1 Gen 1 data rate.
Meanwhile, the downstream port of the JMS583 is compatible with storage device with PCIe interface, such as SSD.
The PCIe port is compliant with PCIe Gen3 x 2 specifications.
1. Insert NVMe SSD into Slot,
2. Connect USB Cable to Dock,
3. Connect USB Cable to Computer.
Please note: it can NOT be identified if insert SSD after USB Cable connected to Computer.
| Products | ||||||
|---|---|---|---|---|---|---|
| Type | M Key and B+M Key | M Key and B+M Key | M Key NVMe | Dual M Key NVMe | M Key and B+M Key | M Key NVMe |
