l Leading automatic focus technology
lPositioning is precise, smooth, and quiet control algorithm PTZ control
l Real FULL HD HD images
l Low noise and high signal-to-noise ratio
l 20 x optical zoom, 12 x digital zoom
l Multiformat video output in full HD
The NDI interface transmission is more stable and anti-interference.
Supportfor 1080P60/50/30/25/59.94/29.97,1080I60/50/59.94,720P60/50/30/25/59.94/29.97 and many other high-definition video standards.
l 255 Position preset positions
l Multi-function remote control
l Infrared remote control signal transmission function
l Optional camera mirror image and flip function
l OSD English menu function
Application
Conference system, telemedicine, distance teaching, etc
Camera parameters
| imaging sensor | 1 / 2.8 inch high quality CMOS sensor |
|---|---|
| Effective pixel | 2.07 million, 16:9 |
| vision signa | HDMI.SDI.NDI Video format 1080P60/50/30/25/59.94/29.97;1080I60/50/59.94;720P60/50/30/25/59.94/29.97 |
| Lens optical zoom | 20 x optical zoom,12 x digital zoom f 4.7- 94mm |
| angle of view | 2.9°-55.4° |
| Aperture factor | F1.6 -F3.5 |
| Digital zoom | 12X |
| minimal illumination | 0.5Lux(F1.8, AGC ON) |
| Digital noise reduction | 2D&3DDigital noise reduction |
| white balance | Manual / automatic / one-click white balance/3000K/ 4000K/5000K/6500K |
| focus | Automatic / manual |
| aperture | Automatic / manual |
| Electronic shutter | Automatic / manual |
| Backlight compensation | Open / pass |
| Wide Dynamic | Off / dynamic level adjustment |
| Video regulation | Brightness, chromatism, saturation, contrast, sharpness, black and white mode, gamma curve |
| noise-signal ratio | >55dB |
|---|---|
| Video interface | HDMI . 3G-SDI . NDI |
| Image code flow | Dual-code flow output |
| Video compression format | H.265 H.264 |
| Control signal interface | RS-232,Ring loop RS232 output |
| control protocol | VISCA/Pelco-D/Pelco-P;Baud rate:115200/9600/4800/2400bps |
| Audio input interface | Dual-channel 3.5mm linear input |
| Audio compression format | AAC .MP3.PCM |
| network interface | 100M network port (10 / 100BASE-TX) Support for the network VISCA control protocol |
| networking protocol | RTSP.RTMP.ONVIF.GB/T28181NDI |
| Power interface | HEC3800 Power Outlet (DC12V) |
| Horizontal rotation | -170° +170° |
| Turn the pitch | -30° +90° |
| Horizontal control speed | 0.1- 180°/second |
| Subduction control speed | 0.1-80°/second |
| Preposition speed | Horizontal: 180 / sec, pitch: 80 / ses |
| Number of prepositions | Users can set up to 255 preset bits (10 remote controls) |
|---|---|
| Power adapter | AC110V-AC220VDC12V/2A |
| input voltage | DC12V±10% |
| input currenton | 1A(maximum) |
| power dissipation | 12W( maximum) |
| Storage temperature | -10 +60 |
| Storage humidity | 20%-95% |
| working temperature | -10 +50 |
| Working humidity | 20% - 80% |
| Dimensions | 258mmX172mmX168mm |
| Weight (approximately) | 1.54kg |
| service environment | indoor |
| Remote maintenance (network interface) | Remote upgrade, remote reboot, remote reset |
| The product contains | 12V/2.5A power supply, RS232 control cable, remote control, instruction manual, warranty card |