Product SKUs |
SYS-5019S-M |
SuperServer 5019S-M (Black) |
Motherboard |
Motherboard |
Super X11SSH-F |
Processor/Cache |
CPU |
- Single Socket H4 (LGA 1151) supports:
- Intel® Xeon® processor E3-1200 v5,
Intel® 6th Gen Core™ i3
- CPU TDP up to 80W
|
System Memory |
Memory Capacity |
- 4x 288-pin DDR4 DIMM slots
- Up to 64GB DDR4 ECC UDIMM
|
Memory Type |
2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs |
DIMM Sizes |
16GB, 8GB, 4GB |
Memory Voltage |
1.2 V |
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
On-Board Devices |
Chipset |
Intel® C236 chipset |
SATA |
- SATA3 (6Gbps) via C236 controller
- RAID 0, 1, 5, 10 support
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
Network Controllers |
- Dual Intel® I210-AT Gigabit Ethernet LAN ports
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
Video |
ASPEED AST2400 BMC |
Input / Output |
SATA |
4x SATA3 (6Gbps) ports |
LAN |
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB |
- 2x USB 3.0 ports (front/rear)
- 2x USB 2.0 ports
|
Video |
1x VGA port |
Serial Port / Header |
2x COM ports (1 rear, 1 header) |
SuperDOM |
2x SuperDOM (Disk on Module) ports with built-in power |
PC Health Monitoring |
Voltage |
Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages. |
FAN |
- Total of 4 fan headers supporting up to 4 fans
- 4 fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
LED |
- CPU / System Overheat LED
- Suspend static indicator LED
- UID/Remote UID
|
Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
- Chipkill support
- RoHS, Halogen Free
|
Chassis |
Form Factor |
1U Rackmount |
Model |
CSE-813MFTQC-350CB |
Front Panel |
Buttons |
- Power On/Off button
- System Reset button
|
LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
Expansion Slots |
PCI-Express |
- 1x PCI-E 3.0 x8 (in x16) AOC slot
- 1x M.2 connector
|
Drive Bays |
Hot-swap |
4x 3.5" Hot-swap SATA3 drive bays |
Peripheral Drives |
Optional |
2x 2.5" Fixed drives internal |
System Cooling |
Fans |
4x 40x28mm 4-pin PWM Cooling Fans |
Power Supply |
Power Supply |
350W AC power supply w/ PFC |
AC Voltage |
100-240 V, 50-60 Hz, 4.2-1.8 Amp |
+5V |
- Max.: 15 Amp
- Min.: 0.2 Amp
|
+5V standby |
|
+12V |
- Max.: 29 Amp
- Min.: 0.5 Amp
|
-12V |
- Max.: 0.2 Amp
- Min.: 0 Amp
|
+3.3V |
- Max.: 12 Amp
- Min.: 0.2 Amp
|
Certification |
80 Platinum Level Certified |
System BIOS |
BIOS Type |
8MB SPI Flash EEPROM with AMI BIOS |
BIOS Features |
- DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
Operating Environment / Compliance |
RoHS |
RoHS Compliant |
Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|